Réplica de la carabina PDW15-AR
- Material: Metal + polímero Peso: 2650 g Color: Negro Longitud: 690 - 780 mm Velocidad: ~ 400 FPS Motor: Eléctrico Fabricante: G&G
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Réplica de la carabina PDW15-AR
La réplica está hecha de metal y polímero reforzado con fibra de vidrio. Todas las partes encajan muy bien entre si. Las piezas metálicas incluyen: el cuerpo, la empuñadura delantera, el cañón exterior, la guía de la culata, las miras, el silenciador y la mayoría de los elementos pequeños. Las piezas de polímero son: la culata y la empuñadura de la pistola.
La réplica tiene una culata deslizante con un compartimento para batería. La culata es ajustable, por lo que se puede adaptar la longitud de la réplica a la preferencias del tirador. La empuñadura de la pistola está perfilada para proporcionar la mejor colocación posible en la mano. El cañón esta acabado con una rosca izquierda de 14 mm que cuenta con un silenciador MOCK muy eficaz.
La réplica es ideal para operaciones en media distancia debido a su velocidad de ~400 FPS. El riel RIS dorsal aplicado permite acoplar cualquier mira óptica. El set incluye un conjunto de miras tipo flip-up
El guardamano original y monolítico hace posible adaptar cualquier segmento de rieles RIS (3 rieles incluidos en el set). La carabina tiene un cañón interno de precisión de 6,03 mm. En el interior del esqueleto metálico del gearbox encontramos un pistón con un conjunto completo de dientes metálicos, rodamientos de 8 mm y engranajes metálicos. Todos estos elementos, combinados con la adaptación de la réplica para ser utilizada con baterías LiPo de 11,1 y el motor High Torque, crean un conjunto extremadamente cohesionado y de alto rendimiento.
La réplica ha sido diseñada para usuarios tanto diestros como zurdos. Los manipuladores como el selector, el retén del cargador y la palanca de bloqueo (recarga) son de doble cara. Es una solución especialmente útil durante los juegos que requieren que el usuario cambie la mano que agarra la réplica.
En el set no está incluido batería ni cargador.
El set incluye:
- cargador
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).