- Konstrukce: plast + kov Hmotnost: 2410 g Délka: 690 mm Výstupní rychlost: ~350 FPS Kapacita maplynynk: 300 nábojů Výrobce: Umarex
Airsoftová zbraň puškaka IWI Tavor CTAR FTU
Airsoftová zbraň je vyroben z plastu. Barel hlaveň a malé části montážjsou vyrobeny z kov. Zásobník typ hi-cap, kompatibilní s typem zbraněmi M4/M16, pojme 300 nábojů. Díky licenci IWI airsoftová zbraň licence má označení hořlavého ekvivalentu. Baterie je umístěna v přední rukojeť, do které se vejde baterie s maximálními rozměry 130x35x20mm. Airsoftová zbraň je vybaven zařízením Tamiya malé.
Na zadní straně airsoftové zbraně je lišta RIS umožňující montáž zaměřovač a optical. V hřbetní části kolejnice je integrována do skládacího přístroje compact. Verze FTU má vestavěný systém MOSFET a FCU kompatibilní s řídicí jednotka FCU ARES.
Mechabox airsoftové zbraně má systém rychlovýměnný pružinový systém.
Sada obsahuje:
-airsoftová zbraň
- zásobník
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).












