4402D sniper rifle replica (with scope and bipod) - black
- Made of: metal and plastic Weight: 3600 g Length: 1190 mm Colour: black Muzzle velocity ~390FPS Powered by: a spring Manufacturer: WELL
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
4402D sniper rifle replica (with scope and bipod) - black
The replica is made of metal elements and plastic. The replica’s body is made of plastic while as the rest of the elements such as the barrel, the bolt carrier, the cocking handle, the trigger, the magazine holding 36 BB pellets and the 22mm RIS rail are made of metal. After unscrewing two screws you disassemble the replica into two parts: the barrel assembly with the trigger mechanism and the replica’s body.
The classical body which is characteristic for this model was made of durable plastic just like the profiled cheek-pad. The replica lies in the hands perfectly and firing it is very comfortable. The stock which is adjustable with the help of pads is also very important and allows to take a comfortable position by every shooter on the condition of adjusting its length properly. Such construction allows a full adaptation to the shooter’s anatomy and, what is followed by it – staying immobile for a longer period of time what in the case of a sniper plays a vital role.
There is a RIS rail located on the bottom part of the body which allows to mount the bipod which is included with the set and which guarantees a better stability while firing. The barrel is ended with a flash-hider. After unscrewing the overlay we gain an outer 16mm clockwise thread. After unscrewing the whole flash-hider we gain an exterior 23mm clock-wise thread.
The set includes a scope with a 4-16 time magnification and the lens’ diameter of 50mm that is mounted on the top RIS rail. The scope itself is equipped with a set of smaller RIS rails which allow to attach additional smaller devices as a laser target marker, for example.
The set includes:
- the replica
- a magazine holding
- a set of tools
- a speed-loader
- a bipod
- a scope
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).