Airsoft rifle Specna Arms SA-FH07 FLEX™ HAL ETU™ Black
- Brand: Specna Arms
- color: Black
- produkt length: 88.50
- weight [g]: 2840
- made from: Metal, Polymer
- muzzle velocity [FPS]: 370
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
The trigger control system supports the replica's performance and allows programming of functions easily using the trigger and selector.
HAL™ chip features:
-trigger detection based on magnetic sensors and Hall effect
-active brake
-binary trigger
-adjustable trigger sensitivity (5 levels from 20 to 100%)
-adjustable pre-cocking (6 levels)
-aUTO programmable fire modes (full auto, semi, 3-rd burst, 5-rd burst)
-sEMI programmable fire modes (semi, binary, AUG, sniper)
-easy programming via trigger
-low battery alarm
-compatible with brushless motors
**The AUTO function fires a 3 round burst first then fires Full Auto.
The replica is made mainly of nylon fibre-reinforced polymer and metal parts. The polymer used is characterised by high strength, rough texture and matt colour.
The most critical components are made of metal . The aluminium alloy parts include the flame suppressor, outer barrel, gas elbow, handguard holder, sighting instruments, dummy slide, fire type switch, breech release button, magazine catch, pins and reloading lever and rear sling mount.
Inside we find:
- 8mm plain bearings
- steel gears- polycarbonate polymer piston with full steel slat
- type 2 cylinder
- steel cut-off lever
- rotary Hop-Up chamber
-high quality 6.03mm precision barrel
The replica uses the quick spring change system, ESA™. This allows the power of the replica to be quickly and efficiently adapted to the conditions expected on the field of play without the need for access to a workshop or a range of specialised tools.
Features of the replica:
- lightweight and compact design.
- Functional bolt-catch.
- hAL™ layout.
- Extendable 6 position stock with rubber footplate.
- Ergonomic pistol grip.
- four RIS rail assembly on the handguard and dorsal rail on the body.
- Precision barrel in combination with rotary unit.
- eSA™ quick-change spring system
Package include:
- S-Mag Hi-Cap Magazine
- Cleaning rod
- Deans adapter - small Tamyia
- Replica
Package exclude:
- The set does not include the battery nor charger
NOTE!!!
When starting the replica for the first time, immediately after connecting the batteries, hold the trigger in SAFE mode for about 5 seconds to activate the HAL™ module
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).