Airsoft rifle Specna Arms SA-G02 ONE™ Kestrel™ ETU Black
- Brand: Specna Arms
- color: Black
- produkt length: 101
- weight [g]: 3700
- made from: Metal
- muzzle velocity [FPS]: 410
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
SA-G02 ONE™ Kestrel™ ETU Black
The Kestrel V2 Basic ETU by Eshooter is an advanced ETU system featuring ease of use, durability and functionality. The Kestrel V2 Basic is programmable with trigger pulls, works with both brush and brushless motors in High Speed and High Torque configurations and increases the reliability of the replica and protects internal parts in the event of overload due to motor damage or battery drain.
Functions of the Kestrel Basic system:
-Pre-cocking programmable in 5 stages with piston position learning function.
(function requires a few single shots after connecting the battery for calibration)
-Active Break. The replica performs a full cycle with each shot, so that no unnecessary overloads are created in the GB due to performing part of the cycle.
-Locked Rotor Protection, function protects the inside of the replica in case of damage to the motor
-Battery Drain Protection. Protection against battery discharge. The motor vibrates, the blue LED illuminates five times to indicate battery drain
-Low/ High Voltage Protection. The module detects the number of battery cells and adjusts operation to different numbers of cells and voltages from 6V to 17V.
The SA-G02 airsoft rifle by Specna Arms has been made predominantly from a uniform zinc-aluminium alloy, with the use of steel components at the most critical points of the replica (so all screws, pins and the tactical sling mount are steel). The fixed buttstock and pistol grip are made of polymer polymer. The body of the replica and the RIS rail assembly have been subjected process of anodisation, which guarantees a high degree of protection of the replica against corrosion. The painting of the replica itself was done powdering process, after the surface had been sandblasted. This method of paint application is known, among others, from G&P replicas and ensures a much higher than usual abrasion resistance of the applied paint.
The replica has been very well fitted - in a way that has so far been seen almost exclusively from G&P or Classic Army manufacturers - and perfectly balanced. This ensures almost ideal manoeuvrability of the replica, while its weight is also almost imperceptible once the replica is placed against the shoulder.
The replica uses the quick spring change system, the so-called Enter & Convert™. This allows for quick and efficient adjustment of the replica's power to the conditions expected on the field of play without the need for access to a workshop or a number of specialised tools - after removing the gearbox from the body of the replica, the spring replacement process itself takes literally seconds.
The advantages of the Enter & Convert™ system are difficult to overestimate. In light of the prevailing trend across Europe towards legal limits on replica discharge velocity and the arrangements that exist within the environments themselves, this system guarantees the user considerable capability and a great deal of freedom. The Enter & Convert™ system makes it possible, with a minimum of time, to change the mainspring and thus adapt the replica's discharge velocity to the playing area so as to guarantee an ideal compromise between the effectiveness of the firearm and the safety of yourself and other players.
The replica has been fully adapted to work with batteries of the types LiPo and LiFe. With a base initial discharge velocity of about ~410 FPS guaranteed by the pre-installed mainspring, the replica is perfectly suited for medium range operations. An M90-type spring is also included, which allows to reduce the initial velocity to ~310 FPS thus making the replica perfectly suited for short-range or indoor operations.
The gearbox, reinforced at the height of the cylinder head, conceals a steel spring guide that is part of the Enter & Convert™ system and set on 8mm ball bearings and washers steel gears. The system is secured with four anti-reverse pawls. It also uses cylinder type 2 and steel cut-off lever. The replica is factory-fitted with an accurate, rotating polymer Hop-Up chamber which allows for very precise and stable adjustment of the BB overclocking system.
Upgraded version has a number of new, reinforced parts such as:
- a set of reinforced, steel gears
- a steel spring guide
- a lightweight, polymer piston
- an aluminium, sealed piston head
- a metal cylinder head
- a sealed, metal nozzle
When the transport grip is removed, we gain access to the 22mm RIS dorsal rail. This allows us to equip the carbine with various types of optical sights. The replica is equipped with metal, adjustable mechanical sights. The rechargeable battery is located in the centre of the fixed stock. Thanks to the considerable space available inside, it is possible to use a power source of quite considerable size and thus of considerable capacity.The standard flame suppressor is mounted on a 14-mm left-hand thread, which makes it possible to attach a sound suppressor in its place.
The replica has a factory fitted replica long 40mm grenade launcher type M203 firing gas grenades, complete with a full mount in place of the standard front handguard and mechanical sighting instruments. Straight out of the box this makes an ideal assault kit, also invaluable for reenactment.
The picture of the grenade is illustrative, it is not part of the kit. It must be purchased separately.
To increase the realism of the gameplay, the replica is also equipped with a functioning breech release.
The replica comes with a steel hi-cap magazine, holding 300 rounds. Its colours correspond to those of magazines designed for firearms typically used by the armed forces.
The Specna Arms replicas are compatible with many magazines available on the market, m.including such manufacturers as:
- BOYI,
- Airsoft Systems,
- SRC,
- King Arms,
- MAG,
- STAR,
- ACM.
Package include:
- Grenade Launcher
- Magazine
- Replica
- M90 additional spring
Package exclude:
- The set does not include the battery nor charger
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).