airsoft Vega Force Company BCM® Avalon Machete SBR Gate Aster SX Half-Tan Carbine
- Brand: VFC
- color: Half-Tan
- produkt length: 66
- weight [g]: 2560
- made from: Aluminum, Steel, Polymer
- muzzle velocity [FPS]: 400
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Vega Force Company's airsoft carbine BCM® Avalon Machete SBR Gate Aster SX
The airsoft carbine from Vega Force Company is equipped with the Gate ASTER SX, which features:
- USB-link and Blu-Link compatibility. This will allow for software updates.
- Trigger language programming
- Pre-cocking
- Improved performance compared to previous Asters
- Low power consumption (only 0.29 mA in sleep mode)
- Built-in converter - will allow operation on weaker batteries
- Correct operation at very low voltage (1.2 V)
- Compatible with brushless motors
- Supports springs up to M200
- Less heat build-up during operation
An airsoft carbine that was developed in collaboration between Vega Force Company and Bravo Company Manufacturing®.
The outer barrel with gas elbow, body, RIS rails, 7.5-inch BCM-MCMR-7 handguard, and flame suppressor were made of aluminium.
From steel were made: All pins, screws, the PDW stock guide with its lock, the flap of the shell ejector.
On the other hand, the following are made of durable polymer: The stock foot, the ergonomic pistol grip of the BCMGUNFIGHTER Grip Mod 3. In the set you will find an 80 mm long battery extension made of polymer.
Product features:
- airsoft carbine from VFC made in cooperation with BCM®
- Reload lever on both sides, fire selector
- Functioning bolt-catch
- Maple Leaf Competitive Grade hop-up barrel
- Maple Leaf Competitive Grade inner barrel
- BCM-MCMR-7 handguard
- Built-in Aster SX Gate system
- 80mm battery extension
- Ergonomic pistol grip from BCM® BCMGUNFIGHTER Grip Mod 3.
- BCMGUNFIGHTER M-LOK Vertical Grip
- Gears 18:1
Package include:
- Mid-Cap Magazine
- BBs speedloader
- Vertical Grip
Package exclude:
- The set does not include the battery nor charger
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).