AM-003 Tactical Pistol replica
- Material: plastic + metal Weight: 1600g Length: 310mm Colour: black Initial muzzle velocity: ~300 FPS Drive: electrical Manufacturer: Amoeba Airsoft
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
AM-003 Tactical Pistol replica
A series of the latest Amoeba Airsoft replicas is based on a well-known design of AR type assault rifles, however these replicas have been considerably modified and enriched of many constructional details and interesting technical solutions, which improve not only their functionality but also their look. Thanks to its compact dimensions, AM-001 is very handy and constitutes a perfect tool during airsoft CQB actions.
The replica's receiver was made of strengthened nylon. Quality of the materials used results in the fact that it is very difficult to recognise on the first sight whether it's plastic or metal. Effective signs of a model, calibre and Amoeba Airsoft's logo were engraved on the receiver. Metal was used to produced the outer barrel, the magazine and some small pieces. The sling mount was made of steel. The pistol grip, properly shaped, covered with scrabrous non-slip texture which improves grip and comfort. The magazine release button was enlarged in order to make its usage easier.
AM-003 is equipped with a RIS rail mounted on the top, which makes it possible to mount a wide range of additional accessories - a scope for example. Aming devices consisting of front and rear sights are integrated with the rail. Access to a hop-up system regulation is achieved in a standard for this design way - by pulling the charging handle and opening the shell ejector. The outer barrel ends with a 14mm right-hand thread.
Amoeba Airsoft's replicas make it possible to replace the spring quickly, with no necessity of dismantling the gearbox. The heart of the replica is a bit strengthened modified gearbox v. 2, which possesses an integrated EFCS module - Electronic Firing Control System. It controls the operation of the trigger mechanism, resulting in a very smooth work and shorter engine reaction. A standard trigger swich assembly was replaced by an electronic system. The EFCS also has a built-in MOSFET system.
EFCS considerably increases the mechanism's life span and the whole replica as well and it allows to use high-voltage batteries, including LiPo. If we buy an outerdedicated EFCS programmer, we may receive a possibily to select fire modes as well as the burst mode (a three BBs series).
The magazine which goes together with the replica is a hi-cap with capacity of 300 BBs. The magazine's case was made of steel.
The set does not include a battery and a charger.
The set includes:
- replica
- magazine
- manual
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).