AY-3M assault rifle replica
- Wykonanie: metal + tworzywo Waga: 2450g Długość: 500 - 725mm Kolor: czarny Prędkość wylotowa: ~420 FPS Napęd: elektryczny Producent: AY
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Replika karabinu szturmowego AY-3M
Ze wzmacnianego polimeru wykonano chwyt przedni oraz chwyt pistoletowy - w matowym, czarnym kolorze. Do produkcji całej reszty repliki praktycznie w całości użyto metalu. Metalowy jest cały korpus, pokrywa komory zamkowej, kolba, jednoczęściowa lufa zewnętrzna. Replika posiada komplet regulowanych, mechanicznych przyrządów celowniczych, jednak bez problemu możemy ją wyposażyć w celownik optyczny dzięki zamocowanej na boku korpusu szynie typu "jaskółczy ogon".
Z metalu wykonano również atrapę zamka/rączki przeładowania - po jej odciągnięciu uzyskujemy dostęp do pokrętła regulacji systemu hop-up. Z prawej strony korpusu znajduje się skrzydełkowy selektor trybu ognia, bardzo podobny (choć nieco krótszy) do stosowanego w replikach typu AK. Mamy możliwość prowadzenia ognia pojedynczego i ciągłego.
Miejsce na akumulator typu LiPo znajduje się wewnątrz chwytu przedniego. Kolba repliki jest wykonana z metalu, zakończona wygodną stopką z twardej gumy. Kolba jest składana na bok korpusu, co znacząco skraca długość karabinu - idealnie do transportu, bądź walki na najbliższym dystansie.
Cóż znajdziemy wewnątrz repliki? Jej sercem jest gearbox v.3, z zespołem spustowym typu AK. Gearbox został zaopatrzony w 7mm, stalowe łożyska kulkowe, na których osadzono komplet stalowych zębatek. Dysza również jest standardu AK, tłok wykonano z mocnego nylonu, posiada stalowe zębatki. Całość napędza krótki silnik typu medium torque. Zastosowana fabrycznie sprężyna główna M120 pozwala w tym przypadku na osiągnięcie prędkości wylotowej rzędu ~420 FPS. W efekcie uzyskano mocny, dobrze spasowany mechanizm oparty na wysokiej jakości częściach, będący jednocześnie świetną bazą do ewentualnego tuningu mocowego i wytrzymałościowego.
Replika dostarczana jest w komplecie z magazynkiem typu hi-cap o pojemności 300 kulek, wykonanym z polimerowego tworzywa w kolorze czarnym.
UWAGA: Luneta widoczna na zdjęciu poglądowym nie wchodzi w skład zestawu.
W zestawie znajduje się:
- replika
- magazynek
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).