B4 SOPMOD SHORT (B.R.S.S.) Carbine Replica - Black
- Material: Aluminum + steel + nylon Weight: 2810 g Length: 705 - 788 Color: Black Muzzle Velocity: ~415 FPS Engine: Electric Manufacturer: BOLT Airsoft
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
BOLT B4 SOPMOD SHORT (B.R.S.S.) Carbine Replica
BOLT B4 SOPMOD SHORT (B.R.S.S.) carbine replica by Taiwanese BOLT Airsoft company is undoubtedly a significant step forward in the evolution of AEG replicas. Due to implemented innovative solutions, it was finally possible to mimic the experience of using a GBBR type replica in a AEG type replica. In short, BOLT Airsoft was able to create an assault rifle replica that truly has a “kick” that it should have.
The replica was made from high-quality materials with the utmost care for details. All metal elements were made of aluminum. Furthermore, some elements were made of steel. These include: the flash hider, magazine and stock mounting ring. The alignment of elements is not a subject of any concern. There are no loose spots, especially between the upper and lower receivers, which is characteristic for “top shelf” replicas. An interesting solution is also the inconsistent paint job of the replica. Instead of a deep black color often seen in replicas, here we have different shades of black and a barrel and many other small elements in a steel color. This allowed bringing the appearance of the replica closer to that of the original, giving it a more realistic look. This effect is further reinforced by the use of a paint that gives the surface a grainy texture.
The replica features a multi-position, telescopic SF stock - featuring a thick, rubber stock pad and sockets for the attachment of a QD tactical sling. The top of the receiver features a RIS 22 mm rail and a metal, removable rear sight. The handguard features a standard RIS 22 mm rail that enables the attachment of additional accessories such as red dot sights, scopes or laser sights. The replica comes with a steel Hi-Cap magazine with a capacity of up to 300 BBs.
The greatest asset of this replica is undoubtedly the recoil and bolt operation simulation system. It consists of two independent elements: a standard bolt operation imitation known from a majority of EBB replicas and a separate system installed inside the stock slide. This system consists of springs, an inertia element and a system that transfers the energy from the piston to the inertia element. The experience offered by the implementation of this solution cannot be compared with anything else offered so far by other serial manufacturers of AEG replicas. An important fact is that due to certain construction differences resulting from the implementation of Blow Back system, the replica is to a large degree compliant with the V.2 standard set by TM. The only important difference is the piston with a characteristic notch. It is, however, equipped with an array of metal teeth, which guarantees a significant durability. The compatibility of remaining parts of the gearbox guarantees an easy tuning as well the access to spare and maintenance parts if needed. A high-quality Hop-Up chamber in combination with a 6.01 mm precision barrel guarantees an excellent performance.
Attention: The set does not include a battery or a charger.
The set includes:
- replica
- magazine
- User’s manual
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).