CM16 Raider L 2.0E airsoft rifle - Tan
- Brand: G&G
- color: Half-Tan
- weight [g]: 3500
- made from: Metal, Polymer
- muzzle velocity [FPS]: 350
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Replica of CM16 Raider L 2.0 carbine
Replica of CM16 Raider L 2.0 carbine produced by G&G was made within the framework of the Combat Machine project, the aim of which is to provide high quality replicas at a price which can be considered economical. The Combat Machine replicas are characterised by G&G's trademark superior workmanship and culture, as well as the high quality of the materials used. Thus, the main factor allowing to reduce the price is the use of a body made of high-quality glass fibre reinforced polymer instead of metal.
The body, pistol grip, MLok stock rail and the discharge device are made of polymer. On the other hand, the outer barrel, the stock guide, the strikers and most of the small parts are made of metal.
The rifle is ideally suited for medium range operations, due to its discharge velocity of ~350 FPS. The applied dorsal RIS rail allows the attachment of any aiming optical device, while the telescopic, accommodating rechargeable buttstock allows the replica to be adapted to individual user preferences. The set includes a set of folding mechanical sighting instruments of the flip-up type.
GB, in addition to the high quality parts typical of G&G, has an innovative system ETU (Electronic Trigger Unit) installed. The system completely replaces the connector and acts as a MOSFET type circuit. Thanks to the electronic trigger operation the system has gained excellent trigger response. Each press of the trigger results in a full GB cycle.
The ETU system has programmable firing modes. The base user has access to SAFE - SEMI - and a choice of FULL AUTO or 3 shot burst modes. Programming is trivial - simply set the selector to the SEMI position and hold the trigger down for 10 seconds. After this, the selector will activate the selected mode on the third selector setting.
The kit does not include a battery or charger.
Set includes:
- replica
- magazine
- cutter
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).