EL-104 PMC-A assault rifle replica (Gen. 2)
- Generation 2 Quick Spring Release System Material: steel + plastic Weight: 3700g Length: 780-860mm Muzzle velocity: ~420 FPS Powered by: battery Manufacturer: E&L
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
EL-104 PMC-A assault rifle replica (Gen. 2)
E&L Airsoft is a new quality on the airsoft market. The manufacturer has set himself the task of creating replicas with the highest possible quality of materials and perfect fitting, resembling the real steels as close as possible and went in this direction as far as he could - by starting production at the same factory, which produced a firearm!
Therefore E&L's products are made with use of steel, hand finished wood components and high-quality composite and definitely can compete with the best brands on the market - also in price. The quality and performance allow it to be both a beautiful wall decoration as well as very effective skirmish gun. Also, some parts of the exterior are the same as in the original weapon and come off the same production line!
Externally, the maximum possible number of elements was made as a 1:1 copy of the original, fully according to military specifications. This means you can exchange elements between the replica and the real steel! This applies to items such as the front bed, gas pipe, iron sights and cleaning rod. Hardly any other manufacturer offers that.
Steel components have been oxidized, which makes them look even more realistic. Also, the attrition process which takes place over time makes oxidized surfaces look much better than it happens by painted or varnished guns.
Also in terms of weight all was made to ensure realism. The replica is heavy, and a full steel outer batter ensures proper balance. A notable feature is certainly the possibility of a partial field-stripping of the replica, like it takes place with the a real steel - with no tools required. Everything is based on pins and levers. The manufacturer paid attention to even of the smallest of details to make their product as close a resemblence to the real steel as possible.
Both the foregrip and gas pipe cap have been made of black polymer.
The „104” models have a shorter barrel, making the gun much more compact. The barrel's end is fitted with a special type of flash hider and gas pipe with integrated sights.
The replica is equipped with a LMT type buttstok ending with a rubber pad. It's regulated, allowing it to be adjusted to the shooters built and individual preferences. A SAW type pistol grip is made of polymer, its shape allowing for a more comfortable and firm hold on the replica.
The left side of the receiver is equipped with a dovetail mount, suitable for the dedicated optical sights (including the original, designed for a firearm), as well as mounts allowing transition to RIS standard used as base for mounting of virtually any type of optics.
Taken straight from the box, the replica is secured in a thick, technical oil that safeguards the product from humidity and possible contamination during transport. A mixture of oil, steel and lacquered wood emits a unique smell, well-known to people in constant contact with firearms.
The replica's battery is located under the lid of the receiver. The cover is mounted on a latch, which allows its rapid removal and replacement of the power source at any time.
The insides of the product are also remarkable. E&L engineers have taken the best solutions on the market and added their own. The pneumatic system consists of a set of silent piston head and a cylinder, which increases the system’s longevity through better amortization. The spring slide has bearings and the piston gear has a bigger inhibitor. It gives the BB more time to be inserted in the chamber, which is of great importance in the case of high rate of fire configurations.
Both of the mentioned solutions result in smoother operation, greater ROF and smaller energy consumption. High accuracy and focus is guaranteed by an equipped internal, precision barrel with a diameter of 6,04 mm.
What parts we can find inside the E&L Gen.2?
- new type, reinforced gearbox frame, based on 9mm ball bearings
- QSR ball bearing spring quide (Quick Spring Release)
- full steel gear set, made on CNC
- one-piece steel cylinder, made on CNC
- Air Seal Nozzle with O-ring
- set of 9mm ball bearings
- reinforced POM piston with 3 steel teeth
- silenced piston head
- High Torque M170 motor with neodymium magnets
- Low Resistance Silver Cords & Switches
Gen.2 replicas have in stock a really nice feature - Magwell Spacer insert, which really makes magazine change easier and faster!
The replicas are delivered in brand new, practical and elegant boxes. Boxes feature a thick foam padding on the inside, which surely and safely secures the replica and all accessories. Each set includes an oiler, however, fixed stock models include the exact same cleaning kit as the one meant for live firearm.
The replica comes with a steel, mid-cap magazine with a capacity of up to 150 BBs.
The set includes:
- replica
- magazine
- oil bottle
- magwell spacer
Exemplary LiPo battery models, which fit under the chamber cover:
http://gunfire.pl/product-pol-1152198888-Akumulator-LiPo-7-4V-1300mAh-25C.html
http://gunfire.pl/product-pol-1152206129-Akumulator-LiPo-7-4V-1300mAh-25-50C-.html
http://gunfire.pl/product-pol-1152198565-Akumulator-Redox-LiPo-1400-mAh-7-4V-20C.html (requires a T-connect/Tamiya small adapter)
Magazine compatibility: replicas are compatible with majority of magazines by LCT and MAG, use of CM, Boyi and JG magazines may requires some adjustments.
Attention: The set does not contain a battery or a charger.
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).