FAMAS F1 assault rifle replica
- Made of: metal and plastic
- Muzzle velocity: ~360 FPS
- Length: 755 mm
- Weight: 2850 g
- Manufacturer : CyberGun
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
FAMAS F1 assault rifle replica
The FAMAS F1 assault rifle replica was made very reliably and with high attention to details. The whole body was made of durable plastic while the elements such as the barrel, the tactical sling attachment points, the foldable bipod, the cocking handle, the RIS rail, the magazine, the firing mode selector lever, the trigger guard and the trigger itself are made of metal. The replica prevails the primary advantage of the original firearm – that is the bullpup system – that is a very good barrel length to the overall weapon length (755mm) ratio what directly influences the effective range of the replica.
You gain access to the Hop-Up adjustment by
taking of the dust cover. The battery is located in the foregrip; to do so you
need to unscrew the safety lever located by the trigger and then slide the
foregrip forwards. You put the whole things together analogically. The firing
mode selector lever is located behind the magazine well and has got three
positions: safe, semi-automatic and full automatic. The iron aiming sight are
adjustable, both horizontally and vertically. The lower part of the foregrip is
equipped with a RIS mounting rail allowing the mount of a tactical grip, a
laser target marker or a tactical flashlight.
The set includes:
- the FAMAS F1 assault rifle replica,
- a Hi-Cap magazine holding 300 BB pellets,
- a charger,
- a tactical grip mounted on a 22mm RIS rail,
- a NiMh 8,4 V 1100 mAh battery,
- a cleaning rod,
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Battery capacity determines the time, which it accumulated enough energy to work gearbox. The greater capacity, then replica will shoot longer.
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS