JG WORKS airsoft carbine JG0738 gen 2 Tan
- Brand: JG
- color: Tan
- produkt length: 87
- weight [g]: 2800
- made from: Aluminum, Steel, Polymer
- muzzle velocity [FPS]: 360
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
JG WORKS JG0738 gen 2 airsoft carbine
The carbine, like the flammable original, is made predominantly of lightweight and durable polymer. Metal is used for the external barrel, flame suppressor, set of mechanical aiming devices and the lower RIS rail with a belt clip. The slide dummy is made of steel. The overall design is exceptionally well-fitted and balanced, and the high manoeuvrability is further enhanced by the use of a side-folding buttstock. The stock has been fitted with a soft rubber foot for improved comfort.
On the back and in the lower part of the front grip, there are universal 22mm RIS mounting rails, which allow the carbine to be equipped with a whole range of additional accessories. The whole is made in a modular system, which allows for easy replacement of e.g. the magazine socket for an adapter to the M4/M16 standard. The battery is located inside the front grip, its removal takes a few seconds and requires the removal of a single mounting pin. Both the reloading handle and fire mode selector are double-sided, ensuring comfortable operation for both right- and left-handed users.
The replica features a quick-change spring system. Access to the QSC system is extremely easy - simply fold down the buttstock to be able to pull out the spring together with the slide.
Also inside, the replica has been made very carefully. The construction is based on the reliable gearbox v.3, which uses reinforced steel gears and a directional piston head, which significantly affects the effectiveness of the replica. The gearbox in the latest version is also equipped with 7mm steel slide bearings.
The replica is supplied with a polymer hi-cap type magazine with a capacity of 470 BBs. It is equipped with hooks, allowing several magazines to be connected together.
Package include:
- Cleaning rod
- Instruction
- Magazine
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).