JG0738 Generation 2 carbine replica
- Brand: JG
- color: Black
- weight [g]: 2605
- made from: Metal, Polymer
- muzzle velocity [FPS]: 360
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Replica of the JG0738 Gen.2 carbine
The replica, like the flammable original, is made mostly of lightweight and durable plastic. Metal is used for the external barrel , the flame suppressor, a set of mechanical sighting devices and the front RIS rail including the carrier belt clip. The slide dummy was made of steel. The overall design is exceptionally well fitted and balanced, the high manoeuvrability is further enhanced by the use of a side-folding flask body.
On the back and in the lower part of the front grip there are universal 22mm RIS mounting rails, which allow to equip the carbine with a whole range of additional accessories. The whole is made in a modular system which allows to easily exchange, for example, a magazine socket for an adapter to the M4/M16 standard. The battery is located inside the front grip, its removal takes a few seconds and requires the removal of one mounting pin. Both the reloading handle and the fire mode selector are both sides, ensuring comfortable operation for both right- and left-handed people.
The latest version of the replica features an innovative system for adjusting the rate of discharge. A special type of spring guide is mounted in the gearbox, the length - and thus the power of the replica - of which is adjusted by means of an Allen screw. The adjustment range is ~360-400 FPS. Access to the adjustment screw is extremely easy - just fold the buttstock and place the Allen key in the visible hole of the rear wall of the body and gearbox.
Also inside the replica has been made very carefully. The design is based on reliable gearbox v.3, which uses reinforced steel gears as well as directional piston head, which significantly affects the effectiveness of the replica. Gearbox in the latest version is also equipped with 7mm, steel slide bearings.
The replica comes with a plastic hi-cap magazine with a capacity of 470 rounds. It has hooks, allowing several magazines to be connected together.
The kit includes:
- replica
- magazine
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).