L85A2 rifle replica
- Brand: ICS
- color: Olive
- weight [g]: 3620
- made from: Metal, Polymer
- muzzle velocity [FPS]: 460
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Replica L85A2 rifle
The L85A2 rifle series earned its reputation during the British Army's presence in Iraq, where it demonstrated the advantages of bullpup systems and an improved design that eliminated the problems of previous versions.
The L85/L86 rifles feature a unique bullpup design in which the breech assembly and magazine are located inside the 'flask', behind the trigger and pistol grip. This allows the rifle to be shorter and lighter, while maintaining standard barrel length and effective range. The result is a versatile rifle that is easier to handle in tight corridors while possessing the firepower and accuracy required for open-air battles.
ICS, the world's leading manufacturer of AEG replicas proudly presents the L85A2 the flagship model of the series.
The replica primarily features a long 480mm internal barrel length, and this combined with the replica's 460 FPS discharge velocity makes it an effective continuous fire machine. The 300 rounds in the Hi-Cap magazine will allow for crushing crushing fire.
The replica's external barrel has a 14mm left-hand ("negative") thread, which allows for the fitting of selected discharge devices, or flame and sound suppressors.
The replica also features a Hop-Up system, which can be adjusted - allowing the replica to achieve even greater range and adapt to the pellets used. Internally, the replica conceals an ICS special Gearbox and a short type motor. The Gearbox interior is compatible with most internal parts from Gearbox v.2 systems
The metal barrel supports the rifle's construction, so the whole thing won't shake or creak. Overall the replica is well-fitted and we should not find any play on it. The barrel has been made of steel, in a manner modelled on the production of the flammable counterpart.
The replica has a classic top rail transport grip integrated with the sighting instruments and a sighting sight with two bore sizes. Both sights can be adjusted: the musket vertically and the peephole horizontally.
Set includes:
- Replica L85A2 rifle
- Two Hi-Cap magazines
- User manual
- Red plastic barrel cap
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).