M133 Mini Vulcan Replica
- Brand: Classic Army
- color: Black
- weight [g]: 5780
- made from: Metal, Polymer
- muzzle velocity [FPS]: 290
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
M133 Mini Vulcan Replica
Classic Army has always been known for its airsoft, multi-barrel machine guns - the large and bulky M134 Minigun and the small but handy M132 Microgun. Both use a hybrid system where the batteries are needed to power the barrel rotating mechanism and gas to fire BBs from the barrel, making it quite the hassle. The M133 Mini Vulcan is a solution to this problem. There is no longer a need for extra gas or HP cylinders. The replica completely electrically powered and requires two 11.1V LiPo batteries.
The replica is made mostly out of a reinforced nylon plastic, allowing the user to maneuver comfortably and move quickly between the firing stations. The four outer barrels and the key parts of the replica's mechanism are made out of metal.
The replica has the option of regulating the rate of fire at 1500 rounds / min or 3000 rounds / min. There is a switch on the right side of the replica for that. In addition, next to it, there are 4 LEDs (3 green and one red) informing about the state of the batteries capacity. The replica also has the AntyHeat system, which protects it from damage due to overheating of the system.
The magazine with a capacity of 2000 BBs is located in the main support tube for the barrels. It is equipped with a spring pressure, which minimizes the rattling of the balls and allows it to shoot at any angle, unlike the competition.
Each of the 307mm barrels has been equipped with a fully adjustable Hop-Up system. And their adjustment is possible after opening the top hatch. IThe system is compatible with standard AEG barrels and buckings. By removing the rear handle, we can access the quick spring change system for each barrel.
Note! The set does not include a battery or a charger.
The set includes:
- a replica
- 2 DEANS-> Tamiya Mała adapters
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).