- Brand: SWL
- color: Oak_leaf
- weight [g]: 3735
- made from: Metal, Plastic
- muzzle velocity [FPS]: 360
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
M41A Pulse Rifle replica
A replica of the fictional M41A Pulse Rifle rifle, which is the standard
equipment of the Colonial Marines and at the same time one of the iconic - next
to the Han Solo’s blaster and the Space Marines bolter - sci-fi shooting
weapons. The rifle firts appeared in the movie
"Aliens" from 1986, which is the second part of the saga about the
fight of Ellen Ripley with the Aliens inhabiting the treacherous depths of
space. The Pulse Rifle has absolutely dominated the imagination of any science
fiction fan who was into military and firearms.
The M41A Pulse Rifle replica was built on the
basis of the proven SW-05 model by Snow Wolf, which will be adored by every fan
of the Aliens series (or - SciFi lover in general). Until now, the construction
of the M41A required significant financial costs - not only owning the M1A1
replica but mounting an expensive conversion on it. Now, thanks to the
introduction of the finished product to the market, it is possible to obtain
even better results at a much lower cost.
The replica was made of a uniform zinc and
aluminum alloy and durable polymer plastic. Thanks to the retractable stock and
oval shape, operating the replica is relatively comfortable (taking into
account, of course, its monstrous sizes).
The rifle is equipped with a functional shot
counter, counting from 95 to 0. The most interesting aspect of the counter is
that after resetting the it, the countdown starts again only after removing and
reattaching a magazine.
The replica is fed with standard, short SW-05
magazines with a capacity of 190 BB’s. It should be noted that other magazines
for the SW-05 are not compatible with the replica. Magazines are loaded on the
basis of internal inserts - in order to change the magazine, it is necessary to
open the bottom hatch securing the socket.
The replica utilities a 270 mm long inner
barrel and a pneumatic system that gives an effective initial muzzle velocity
of 360 FPS. The replica is powered by a stick type battery, located on the
front, under the barrel, in the grenade launcher dummy.
It is certainly not a typical replica for
Sunday shooters, but due to its symbolism, uniqueness and pure fun from
shooting it, it will be appreciated by every fan of science fiction.
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).
















