MDR-X electric carbine replica - Black
- Brand: SVB
- color: Black
- weight [g]: 2700
- made from: Aluminum 6000, Nylon
- muzzle velocity [FPS]: 380
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
MDR-X Carbine Replica
The MDR-X carbine replica is a licensed
replica of the firearm equivalent
from the Desert Tech workshop, which has already demonstrated its
abilities in developing innovative platforms. Thanks to their courtesy, D-Tech
and Silverback allow us to admire the airsoft version of the replica.
The MDR-X carbine stands out with an incredible
attention to detail and build quality on the outside. Inside, there is a
focus on the implementation of interesting, simple, but also revolutionary
solutions.
The polycarbonate hop-up chamber in the TDC
system, with 36 degrees of regulation, is responsible for the BBs' spin. The
standard bump (low) is installed in the replica right out of the box. It
generates pressure for standard BBs in the range from 0 to 750 μm. he set also
includes a high bump for heavier BBs configuration, increasing the adjustment
range from 500 to 1250 μm.
Product
features:
- Power option with 11.1V and 7.4V batteries (7.4V
via an adapter from the set)
- Manufactured under the exclusive license of Desert Tech LLC
- Barrel, body, muzzle brake made of 6000 series Aluminum
- MLOK handguard with windows at 3, 6, 9 o'clock positions
- Fully engraved markings with a unique serial
number
- Ambidextrous manipulators, along with a
changeable side ejection port,
- Handguard, stock, and grip made of PA6 nylon reinforced with glass fiber
A few
words about the gearbox and parts:
- Brass AEG inner barrel with a length of 420 mm and a diameter of 6.05 mm
- Brass AEG inner barrel with a length of 420 mm and a diameter of 6.05 mm
- Polycarbonate hop-up chamber in TDC system
- Reinforced gearbox shell
- Drive based on 18:1 gear ratio hardened MIM steel
- Built-in ETU system based on Hall sensors
- Aluminum Cylinder Bore-Up (19% wider than standard AEGs)
- Quick spring exchange
- Aluminum cylinder head with a rubber bumper
- Aluminum, vented piston head
- Ball bearing based with a 10mm diameter
- Aluminum piston with a full steel 16-tooth rail
The whole GB system is powered by a High Torque motor with a very high lifting
capacity of 28 TPA, which generates approx. 19k rotations per minute when
powered with an 11.1V battery.
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).