PR301 Kompetitor Carbine Replica - Black
- Material: Polymer + metal Weight: 1975 g Colour: Black Length: 740-840 mm Initial Muzzle Velocity: ~330 FPS Type: Electric (Electric Blow-Back) Manufacturer: APS
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
PR301 Kompetitor Carbine Replica - Black
APS company presents Kompetitor series. A line of airsoft replicas ideal for users that are only just beginning their airsoft adventure and those that are looking for replicas from an attractive price range, but with solid craftsmanship of both the internal parts and the external mechanism. It is a “budget” line that has a very good price/quality ratio.
The body, stock and handguard were made from a reinforced polymer. The replica features a metal external barrel, stock pipe, magazine and small elements such as trigger, fire mode selector or bullet ejection flap. Access to the hop-up regulation is gained after the cocking handle has been pulled back. The battery is stored inside the handguard.
The replica is equipped with a regulated, collapsible stock with a rubber buttpad. The stock has a short RIS rail for attachment of additional equipment. Another 22mm RIS rail is located under the transport handle, which can be used to mount various optical sights.
The replica features an EBB system – Electric Blow Back, which sets in motion the bolt replica in motion and gives the user an extra dose of realism.
The heart of PR301 is the new V2 APS Hybrid gearbox. Designed and constructed in an innovative, user-friendly way. According to tests conducted by the manufacturer it is 33% more effective in terms of power consumption than a standard version. Equipped with a fast spring release system, which allows for rapid change of muzzle velocity without having to open up the gearbox.
Reinforced gears have been placed on 7mm, metal bearings. Moreover, inside is a half-precise, 6,04 mm in diameter internal barrel, which in conjunction with muzzle velocity of about 330FPS makes PR301 an ideal tool for airsoft combat on short and middle range – including indoor combat and CQB.
Apart from the replica, the set includes a polymer high capacity (300 BBs) magazine.
The set does not include a battery or a charger.
The set includes:
- A replica
- A magazine
- A cleaning rod
- A user’s manual
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).