Replica KSG Shotgun
- Brand: TMR
- weight [g]: 5000
- power supplu: Gas
- made from: Metal, Polymer
- muzzle velocity [FPS]: 320
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Replica KSG Rifle
The KSG Rifle replica from the iconic Japanese company Tokyo Marui will be a real treat for CQB gameplay enthusiasts (and more!). The replica is equipped with 3 internal barrels so it shoots depending on the mode.). The replica has been equipped with 3 internal barrels so that it shoots depending on the mode: 3 or 6 BBs at the same time (the switch is located under the barrel cover)! 6mm ammunition is loaded into atrapy shells with a capacity of 30 BBs, which are then placed in the cartridge chamber located in the rear of the replica. This is due to the fact that the rifle is designed in the Bullpup configuration, which translates into exceptional compactness, so important in CQB operations, while retaining a large barrel length. As in the original, there are two cartridge chambers inside, one of which feeds the BBs into the barrel proper, while the other is a magazine for 2 additional shells.
The green gas tank is located in the butt and takes the form of a pull-out "magazine". The system is very economical and economical to use - one fill of gas allows for approximately 70 shots! Intuitive operation is made possible by the placement of the fuse right next to the trigger holster.
The replica has been manufactured almost entirely from durable polymer, the exceptions being the outer barrel, gas magazine and upper RIS rail. The stock foot is made of hard rubber and its shape prevents it from slipping off the shoulder.
Tokyo Marui-made gas airsoft guns have been renowned for years for their excellent reliability and Japanese perfection of internal components - a class in itself.
The replica also fits 30-BB shells from other manufacturers, including GFC Guns and Double Eagle.
The kit includes:
- replica
- shells for 30 BBs
- green gas tank
- instruction manual
The use of 134a gas is recommended for Tokio Marui gas airsoft guns - gases with higher pressures may cause damage/breakage to the breech and this is not covered under warranty
.Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).