RPKS74MN NV machinegun replica
- Made of: steel and plastic Weight: 4300g Length: 1060mm Muzzle velocity: ~415 FPS Magazine capacity: 600 BB pellets Powered by: a battery Manufacturer: LCT
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
RPKS74MN NV machinegun replica
The machinegun replica is made by the LCT company and is made almost fully of steel. The flash-hider, the bolt carrier 's cover, the gas -pipe, the bipod, the outer barrel, the bolt carrier, the front iron sight's base, the gas tube's knee, the rear iron sight's base, the front grip's mount, the cleaning rod and the iron aiming sights are made of steel. The pistol grip, the stock and the front grip are made of black nylon.
The whole is made of well made and well fitted elements and it creates and aesthetic, durable and pretty heavy replica of the hand held machinegun.
The replica is equipped with a plastic made hop-up chamber. The replica uses a standard V3 gearbox which is typical for the AK replicas. Inside, there is a reinforced ball bearing spring guide and a piston with 8 metal teeth. Additionally, the gearbox is equipped with a sealed nozzle, a cylinder's head and a ball bearing sealed piston head.
The foldable steel bipod, the hi-cap type magazine holding 600 BB pellets and the almost 600mm long outer barrel and the great durability make that the LCT replica is perfect as a support replica.
The set includes:
- the replica,
- a magazine
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).