SA-G01 HAL² ™ Carbine replica Black
- Brand: Specna Arms
- color: Black
- produkt length: 88
- weight [g]: 3500
- made from: Metal, Polymer
- muzzle velocity [FPS]: 410
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Replica carbine SA-G01 HAL² ™ Black
The replica carbine SA-G01 by Specna Arms was made predominantly from a uniform zinc-aluminium alloy, with the use of steel elements in the most critical points of the replica (so all screws, pins, as well as the magazine and shell ejector screen are steel). The adjustable flask, which houses the battery, the front grip and the pistol grip are made of polymer plastic.
The replica
has been equipped with Specna Arms' advanced electronic control system
HAL² ™. This is a Polish system in which a magnetic Hall effect-based trigger
provides unprecedented sensitivity (up to 500 points), responsive operation,
while being insensitive to dirt and external light.HAL² ™Widget
works with all standard triggers, so you can choose
one of the numerous models available on the market and personalize even more
your replica. The built-in Bluetooth® Low Energy module enables an easy and stable
connection to your phone, and at the same time ensures long battery life of the replica.
Simply switch it on and it is immediately possible to configure the settings. On the other hand,
a series of sensors ensures trouble-free operation of the replica and prevents its
damage - should a problem be detected.
With the
free app Specna Link™ Google Playor Specna
Link™ App Storeyou will discover all the possibilities of the HAL² system
™. This intuitive and glove-friendly tool will allow you to
to quickly adjust the parameters of the replica to the requirements of a given shooter. You can
create several profiles for one replica - with different settings, or
create accounts for several different replicas. Then all you have to do is select the
option in the app and you're ready to play!
All the
capabilities of HAL^2 and the Specna Link ™ application:
-.
trigger sensitivity adjustment,
-.
precocking for faster trigger response,
-.
selectable firing mode: SINGLE, BINARY, SERIAL or AUTO and
assigning it to the selected selector position,
-.
adjustable series length,
-.
speed setting,
-.
LiPo/LiIon battery protection against over-discharge,
-.
magazine mode,
-.
continuously displayed battery charge status,
-.
saving settings for different game modes,
-.
advanced telemetry data, which can be collected in one place and
control performance with them,
-.
the ability to track the status of the replica in real time.
.
The replica has been very well-fitted - in a way that has so far been seen almost exclusively in manufacturers of the G&P or Classic Army class - and perfectly balanced. This ensures almost ideal manoeuvrability of the replica, while its weight is, moreover, after placing the replica at the shoulder almost imperceptible.
The replica uses the quick spring change system, the so-called Enter & Convert™. This allows for quick and efficient adjustment of the replica's power to the conditions expected on the field of play without the need for access to a workshop or a number of specialised tools - after removing the gearbox from the body of the replica, the spring change process itself takes literally seconds.
The replica has been fully adapted to work with batteries of the type LiPo and LiFe. Thanks to the base initial discharge velocity of the order ~410 FPS guaranteed by the factory-installed mainspring, the replica is perfectly suited for medium-distance operations. A M90-type spring is also included, which allows the initial velocity to be reduced to ~310 FPS making the replica perfectly suited for short range or indoor operations.
The gearbox, reinforced at the height of the cylinder head, conceals a steel spring guide that is part of the SAEC™ System and mounted on 8mm ball bearings and washers steel gears. The system is secured with four anti-reverse pawls. The lightweight, polycarbonate plastic piston is fitted with a set of steel teeth to increase its strength. It also uses cylinder type 2 and steel interrupter. The replica is factory-fitted with an accurate, rotating, polymer Hop-Up chamber which allows for very precise and stable adjustment of the ball cocking system.
The rifle is equipped with a 22mm dorsal RIS rail, located under the transport grip, and an adjustable flask. Thanks to the extendable buttstock, it is possible to adapt the length of the replica to the build and preferences of the shooter. The standard flame suppressor is mounted on a 14-mm left-hand thread, which makes it possible to attach a sound suppressor in its place.
For increased gameplay realism, the replica is also equipped with a functioning breech release. A 40mm grenade launcher for gas grenades is also fitted.
The replica also comes with a steel hi-cap magazine that holds 300 rounds.
The Specna Arms replicas are compatible with many magazines available on the market, including manufacturers such as:
- BOYI,
- Airsoft Systems,
- SRC,
- King Arms,
- MAG,
- STAR,
- ACM.
Package include:
- Instruction
- Hi-Cap Magazine
- Replica
- M90 additional spring
Package exclude:
- The set does not include the battery nor charger
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).