SA-H09 ONE™ TITAN™ V2 Custom carbine replica - Black
- Brand: Specna Arms
- color: Black
- produkt length: 0.09
- weight [g]: 3350
- made from: Metal, Steel, Polymer
- muzzle velocity [FPS]: 410
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
SA-H09 ONE™ TITAN™ V2 Carbine Custom
Limited version of the replica with GATE brand TITAN™ V2 Advanced system installed!
The TITAN™ V2 Drop-In mosfet controller kit transforms your AEG into an advanced training replica. It gives you a tactical edge with lightning-fast trigger response, with the ability to modify the replica and adapt it to any mission with 20 available features. This is GATE's most advanced and top-of-the-line model.
The TITAN™ V2 controller breathes a whole new life into your ASG electric replica.
TITAN™ gives you new possibilities:
- Trigger sensitivity adjustment
- Pre-cocking boost, i.e. adjustment of keeping the spring taut (shortens the time from pressing the trigger to firing)
- Adjustment of fire selector modes
- Series firing mode
- Adjustment of rate of fire
- Warns of low battery
- Protects battery from damage
- "Sniper delay"
- Full cycle detection
- AUG mode - two trigger sensitivities can be set (single and continuous fire)
Full layout description: https://gunfire.com/pl/products/zestaw-kontrolera-titan-tm-v2-advanced-set-rear-wired-1152218717.html
The Specna Arms SA-H09 carbine replica is made predominantly from a uniform zinc-aluminium alloy, with the use of steel elements at the most critical points of the replica (so all screws, pins and the tactical suspension mount are steel). The SF type flask, which houses the battery, as well as the pistol grip, are made of polymer plastic. The body of the replica and the RIS rail assembly have been subjected to the anodising process, which guarantees a high degree of protection of the replica against corrosion. The painting of the replica itself was done by a powder coating process, after the surface had been sandblasted. This ensures that the applied paint is much more abrasion resistant than usual. The barrel is marked with the manufacturer's markings.
The stock has been very well-fitted - in a way that has so far only been seen almost exclusively from G&P or Classic Army manufacturers - and perfectly balanced. This ensures almost ideal manoeuvrability of the replica, while its weight is, in addition, when the replica is placed against the shoulder, almost imperceptible.
The replica uses the quick spring change system, the so-called Enter & Convert™. This allows for quick and efficient adjustment of the replica's power to the conditions expected on the battlefield without the need to have access to a workshop or a number of specialised tools - after removing the gearbox from the body of the replica, the spring replacement process itself takes literally seconds.
The advantages of the Enter & Convert™ system are difficult to overestimate. In light of the prevailing trend throughout Europe towards legal restrictions on the firing speed of the replica and the arrangements that exist within the environments themselves, this system guarantees the user considerable options and a great deal of freedom. The Enter & Convert™ system makes it possible with a minimum of time to replace the mainspring and thus adapt the replica's exit velocity to the area of play so as to guarantee the ideal compromise between the effectiveness of the firearm and the safety of yourself and other players.
The replica has been fully adapted to work with batteries of the type LiPo and LiFe. With a base initial discharge velocity of about ~410 FPS guaranteed by the pre-installed mainspring, the replica is perfectly suited for medium range operations. An M90-type spring is also included, which allows the initial velocity to be reduced to ~310 FPS making the replica perfectly suited for short-range or indoor operations.
The gearbox, reinforced at the height of the cylinder head, conceals a steel spring guide that is part of the Enter & Convert™ system and mounted on 8mm ball bearings and washers steel gears. The system is secured with four anti-reverse pawls. It also uses cylinder type 2 and steel interrupter. The replica is factory-fitted with an accurate, rotating polymer Hop-Up chamber which allows for very precise and stable adjustment of the bullet overtravel system.
The rifle is equipped with a 22mm dorsal RIS rail, a set of front RIS rails and an adjustable buttstock. On the upper RIS rail, metal flip-up sights have been fitted, but they can be freely replaced by any optoelectronic sighting device. Thanks to the sliding buttstock finished with an anti-slip textured footplate, it is possible to adjust the length of the replica to the shooter's build and preferences. The flame suppressor is mounted on a 14-mm left-hand thread, which makes it possible to attach a sound suppressor in its place.
For increased realism of gameplay, the replica is also equipped with acting breech release.
The replica also comes with a steel hi-cap magazine, holding 300 rounds.
Package include:
- Hi-Cap Magazine
- Replica
- M90 additional spring
Package exclude:
- The set does not include the battery nor charger
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).