SA-H11 ONE™ carbine replica - black
- Brand: Specna Arms
- color: Black
- weight [g]: 3000
- made from: Metal, Polymer
- muzzle velocity [FPS]: 410
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Characteristics of the replica SA-H11 ONE™ carbine
Replica SA-H11 carbine from manufacturer Specna Arms is a well-fitted and very well-balanced airsoft gun. It is made of uniform zinc and aluminium alloy, and the most sensitive areas are steel, namely sling grip, screws and pins. It is characterised by almost ideal manoeuvrability, high functionality, as well as versatility - you can use the replica on the open battlefield and indoors.
The replica is equipped with a reinforced gearbox, which includes:
- steel gears
- four anti-reverse pawls
- type 2 cylinder
- steel cut-off lever
- 8-millimetre ball bearings
Main features of the SA-H11 ONE™ replica
The SA-H11 ONE™ replica features a quick spring change Enter & Convert™, which allows you to change the spring in just seconds. You can thus very easily reduce the base discharge speed from ~410 FPS to ~310 FPS. All you need to do is replace the stronger mainspring with the weaker M90 spring, which is also included with the replica. The ball boost can in turn be precisely adjusted with the rotating and polymer Hop-Up chamber.
Other features of the SA-H11 ONE™ carbine replica:
- polymer adjustable stock and pistol grip
- non the body of the manufacturer's markings
- equipped with manipulators on both sides
- functioning lock release
- compatible with LiPo and LiFe batteries
- equipped with dorsal 22mm RIS rail and front RIS rail assembly
- has metal sighting instruments flip-up type
- abrasion-resistant paint due to powder coating
- 14-millimetre left-hand threadt allows fitting of a sound attenuator
- anodized assembly RIS rail
- hi-cap magazine holds 300 BBs
Set does not include battery and charger.
Set includes:
- magazine
- mechanical sighting devices
- extra mainspring
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).