SAI-T2 Training Rifle Replica - BSA Cerakote Stripe Camo
- Material: Metal + polymer Weight: 3150 g Length: 810 - 890 mm Color: Stripe Camo Muzzle Velocity: ~420 FPS Engine: Electric Manufacturer: EMG
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
SAI-T2 Training Rifle Carbine Replica
A replica manufactured by a renowned EMG company. Thanks to the license from American SAI, a manufacturer of parts for the live firearm original, the User can feast his eyes on authentic designation and markings on the receiver and the RIS handguard with MLOK mounting system.
The replica’s appearance was carefully imitated according to licensed parts for the live firearm original. The receiver was covered with licensed markings, similarly to the RIS 22 mm handguard. The replica also features an individual serial number.
The replica is covered with a custom camo pattern - CERAKOTE Black Sheep Arms - Stripe Camo.
The replica was made mainly of high-quality metal. The receiver of the replica, RIS rail and the barrel were made of metal. The replica has no shortage of steel elements too. Thanks to the top RIS 22 mm mounting rail, it is possible to attach a wide array of additional accessories such as optical sights, lighting or tactical grips. The replica is equipped with two QD tactical sling swivels on the stock and in the front - enabling the detachment with one press of a button.
The implemented in the replica Transformer system is another step in the development of compact and modular AEG replicas. The main advantage of the system is the possibility of quick change and complete detachment of the handguard, e.g. for transportation purposes.
The most important part of the replica is the modular handguard. There is the option of its exchange, e.g. for a longer one or its complete removal, e.g. for transportation purposes. The installation and detachment are very simple. It is necessary to put the handguard on the barrel nut, turn and snap the QD mechanism. The replica can be turned into a CQB carbine in an instant and, should a need arise, even into an assault rifle.
The heart of the replica consists of a well-aligned, air-sealed system based on a reinforced gearbox V2 with 8 mm bearings. A high-quality craftsmanship of internal parts allows this replica to achieve a muzzle velocity of ~420 FPS, which makes it ideal for operations on a medium and short range whilst remaining a good base for potential tuning. The replica uses a low-resistance mini DEANS (T-connect) connector. The battery is stored in the stock pipe.
The replica comes with a Mid-Cap magazine with MOTS markings and a capacity of up to 130 BBs.
The set does not include a battery or a charger.
The set includes:
- replica
- magazine
- flip-up iron sights
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).