Silverback x Desert Tech MDRX Micron V3 airsoft Carbine Black
- Brand: SVB
- color: Black
- weight [g]: 2610
- made from: Aluminum, Nylon, Steel
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Silverback x Desert Tech MDRX Micron V3 airsoft carbine
An electric-powered carbine created by Silverback, it is also licensed by the American company Desert Tech LLC® , which translates into the appropriate markings on the body of the replica.
The airsoft version has been created with all the details and details, faithfully reproducing the combustible counterpart. This, together with the combination of high quality external and internal workmanship, results in a very interesting replica, which will certainly stand out from other models during airsoft battles.
The body of the replica, the external barrel and the discharge device were made using 6000 aluminium.
The pistol grip along with the stock was made from glass fibre reinforced nylon. The butt has a rubber foot.
The rifle's stock (also made of nylon), is compatible with the M-LOK system - this will allow the attachment of additional accessories such as torches, lasers, etc. Also worth mentioning are the QD mounts (at the butt) and the double-sided manipulators - a fire mode switch and magazine release.
Inside the replica we find:
- 22.5cc cylinder - CNC aluminium, 26mm diameter
- Quick-change spring system
- Tappet plate-less" construction
- Aluminium cylinder head (CNC) including NBR buffer, stainless steel nozzle.
- Ventilated piston head (CNC aluminium) including O-rings and POM guide O-ring
- Bearing-mounted spring guide
- Aluminium piston with complete steel jaw.
- Gears 18:1 made of hardened steel
- 10 mm ball bearings
- Hi-Torque 19000RPM (11.1V) 28 TPA neodymium motor
- TDC Hop-up chamber
- Hop-Up rubber with 70 degree hardness
In addition, inside you will find an ECU based on Hall sensors created in collaboration with the T238 brand, which features:
- Interoperability with Li-Po 7.4V and 11.1V batteries
- Interoperability with brushless motors (with some caveats) - see additional description
- Series/binary fire mode, DMR delay, ROF settings, pre-cocking, sleep mode, active brake and battery protection against loss.
The kit additionally includes:
- Additional springs of 80 and 100 N
- 4 pairs of magazine stabilisers
- Drift pin
- Allen spanner 2/5 mm
- Hop-up distancer for BBs over 0.32 grams
Package include:
- Instruction
- Mid-Cap Magazine
- Patch
- Replica
- Allen key
Package exclude:
- The set does not include the battery nor charger
When using brushless motors, the manufacturer does not recommend the use of batteries with a voltage higher than 7.4V
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).