Snow Wolf SW-020 CB-B2 Tan airsoft Carbine
- Brand: SWL
- color: Tan
- weight [g]: 3895
- made from: Metal, Polymer
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Snow Wolf SW-020 CB-B2 airsoft carbine
The bull-pup (stockless) airsoft carbine has a long tradition and just as many supporters as sceptics. One of the advantages of this type of design, however, is hard to dispute - the possibility of using a really long and effective barrel, while maintaining the relatively compact dimensions of the carbine itself. The aesthetic qualities should not be forgotten either - bull-pups are simply distinctive and cannot be mistaken for anything else. The replica was made using, among other things, metal - we are talking about a very long external barrel, ending in a characteristic compensator, which can usually be seen in sniper rifles. In addition, the dorsal rail, which will allow the attachment of additional accessories, and additional rails (side and bottom) on the handguard - which is also metal - are made of metal. Metal(steel) is used for the bolts and pins, as well as for the tactical sling ears (both front and butt).
Plastic is used for the body of the replica, the reloading handle, the characteristic magazine, the vertical grip and the pistol grip. The stock foot (if we can speak of a stock in a stockless system) is made of rubber. The stock has room for a battery pack, and no tools are required as it is a "push-on" attachment
The adjustment knob for the hop up system is accessed as standard by pulling back the reloading handle, thereby exposing the shell ejector window. The handle can be locked in the rear position. Characteristically for this design, the ejector windows are located on both sides so that left-handed users will also have comfortable access.
The safety is located at the pistol grip and can be operated from both sides.
The replica is equipped with a quick-change spring system, which allows the mainspring to be replaced with minimal time. There is no need to take out the gearbox and disassemble the entire structure. The system allows quick and efficient adjustment of the replica's power to the conditions expected on the airsoft battlefield, without the need to have access to a workshop or a range of specialised tools. We can now easily guarantee the ideal compromise between the effectiveness of firepower and the safety of ourselves and other players.
Package include:
- Hi-Cap Magazine
- Replica
- Sling
Package exclude:
- The set does not include the battery nor charger
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).