Specna Arms Daniel Defense® MK18 SA-E19 EDGE™ HAL ETU Single Fire Only Chaos Bronze airsoft Carbine
- Brand: Specna Arms
- color: Chaos Bronze
- weight [g]: 2675
- made from: Metal, Polymer
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Specna Arms Daniel Defense® MK18 SA-E19 EDGE™ HAL ETU Single Fire Onlyairsoft Carbine
The replica presented has a semi-auto fire mode only. There is no serial/full-auto firing capability
Specna Arms presents the EDGE™ line with theHAL™system
The trigger control system aids in the operation of the replica and allows programming of functions easily using the trigger and selector.
HAL™ chip features:
-trigger detection based on magnetic sensors and Hall effect
-active brake
-binary trigger
-adjustable trigger sensitivity (5 levels from 20 to 100%)
-adjustable pre-cocking (6 levels)
-easy programming via trigger
-low battery alarm
-compatible with brushless motors
**The AUTO function fires a 3 round burst first then fires Full Auto.
The MK18 SA-E19 EDGE™ is an airsoft gun produced thanks to the cooperation of the American company EMG Arms with the well-known airsoft brand Specna Arms. On its body there are licensed markings of Daniel Defense®, as well as an individual serial number - confirmed by a hologram. the SA-E19 rep lica is characterised by high repeatability of shots and high accuracy, and thanks to the use of high-quality parts, it is also ready for further tuning.
Inside the replica, we will find, among others
- 8 mm ball bearings
- steel gears
- polymer reinforced piston, with a full steel jaw
- aluminium sealed nozzle
- aluminium double-sealed cylinder head
- bearing spring guide
The SA-E19 EDGE™ replica is equipped with the ESA™ quick spring change system, which allows you to replace the factory-installed spring with a weaker M90 spring - both of which are included in the kit - without any special tools and in just a few moments. You can also easily use a stronger M140 spring - due to the reinforced gearbox.
Model features:
- barrel finished with Nano Coating - scratch resistant
- 14mm CCW threaded barrel
- fitted with folding sights
- rotating Hop-Up chamber
- has a precision 6.03 mm inner barrel
- can work with weaker and stronger springs
- two S-MAG mid-cap magazines with a capacity of 125 rounds
- high quality parts and possibility of further tuning
- 22 mm front RIS rail
- attachment eyelet for tactical sling on both sides
Package include:
- 2 x mid-cap S-MAG magazine
- Cleaning rod
- Replica
- Allen key
- Small Tamyia - Deans adapter
- M90 additional spring
- Vertical Grip
Package exclude:
- The set does not include the battery nor charger
NOTE!!!
When starting the replica for the first time, immediately after connecting the batteries, hold the trigger in SAFE mode for about 5 seconds to activate the HAL™ module
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).