Specna Arms SA-C08 CORE™ HAL ETU™ Single Fire Only airsoft Carbine Black
- Brand: Specna Arms
- color: Black
- produkt length: 74
- weight [g]: 2235
- made from: Metal, Polymer
- muzzle velocity [FPS]: 380
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Specna Arms SA-C08 CORE™ HAL ETU™ Single Fire Only airsoft Carbine
The replica presented has a semi-auto fire mode only. There is no serial/full-auto firing capability
Specna Arms presents the CORE™ line with theHAL™ system
The trigger control system aids in the operation of the replica, and allows programming of functions easily using the trigger and selector.
HAL™ chip features:
-trigger detection based on magnetic sensors and Hall effect
-active brake
-adjustable trigger sensitivity (5 levels from 20 to 100%)
-adjustable pre-cocking (6 levels)
-easy programming via trigger
-low battery alarm
-compatible with brushless motors
**The AUTO function fires a 3 round burst first then fires Full Auto.
The body, slide and SF battery compartment, front grip and pistol grip are made of nylon fibre-reinforced polymer. Other components, such as the barrel, flame suppressor, enlarged reloading handle and tactical sling assembly are made of metal (all screws, pins, shell ejection window and dummy lock are made of steel). The barrel is marked with the serial number.
The replica is very well-fitted, the user will not experience any play between the lower and upper parts of the body. The use of lightweight polymer body allowed to reduce the weight, which makes it perfect for dynamic games or prolonged milslims. Furthermore, the fibreglass reinforcement also makes the body stronger than polymer and metal bodies.
The replica uses the quick spring change system, ESA™. This allows quick and efficient adjustment of the replica's power to the conditions expected on the field of play without the need for access to a workshop or a number of specialised tools - simply unscrew the butt guide to reveal access to exchange the spring without having to pull out or disassemble the gearbox.
The advantages of the ESA™ system are difficult to overstate. In view of the arrangements within the environments themselves, this system guarantees the user considerable possibilities and a great deal of freedom. The ESA™ system makes it possible, with a minimum of time, to change the mainspring and thus to adapt the replica's discharge speed to the area of play, so as to guarantee the ideal compromise between the effectiveness of fire control and the safety of oneself and other players.
The replica has been fully adapted to work with LiPo and LiFe type batteries. With a base initial discharge velocity of ~380 FPS guaranteed by the pre-installed mainspring, the replica is perfect for medium range operations. An M90-type spring is also included, which allows the initial velocity to be reduced to ~310 FPS, making the replica perfectly suited for short-range or indoor operations.
The gearbox conceals 8-mm slide bearings and the supported steel gears. The system is secured by four anti-reverse pawls. The lightweight polycarbonate piston is fitted with a full steel bar for added strength. A type 2 cylinder and steel cut-off lever are also used here, and the strength of the parts allows them to work with M140 springs.
The finely crafted Rotary Hop-Up chamber works perfectly with the high quality 6.03mm precision barrel. The use of a precision barrel positively affects the range and accuracy of the replica. It is important to remember to use high quality 6mm ammunition.
The replica is equipped with a KeyMod handguard, a 22mm dorsal RIS rail and an adjustable buttstock. A peephole has been fitted on the upper RIS rail along with a musket. Thanks to an extendable buttstock finished with a foot with an anti-slip texture, it is possible to adjust the length of the replica to the build and the shooter's preferences. The standard flame suppressor is mounted on a 14-mm left-hand thread, which makes it possible to attach a sound suppressor in its place.
The kit includes an S-MAG hi-cap magazine with a capacity of up to 300 rounds. The S-MAG is an exclusive polymer magazine designed by Specna Arms. What draws attention is the distinctive texture composed of Specna Arms logos. The S-mag ensures trouble-free feeding of BBs, even at high ROF.
Package include:
- S-Mag Hi-Cap Magazine
- Cleaning rod
- Replica
- Allen key
- Small Tamyia - Deans adapter
Package exclude:
- The set does not include the battery nor charger
NOTE!!!
When starting the replica for the first time, immediately after connecting the batteries, hold the trigger in SAFE mode for about 5 seconds to activate the HAL™ module
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).