Specna Arms SA-C09 CORE™ HAL ETU™ Gen.2 airsoft Carbine Black
- Brand: Specna Arms
- color: Black
- weight [g]: 2415
- made from: Aluminum, Steel, Polymer
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Specna Arms SA-C09 CORE™ HAL ETU™ Gen.2airsoft Carbine
The SpecnaArms Core Gen.2 series of carbines was created to provide the best possible user experience at an attractive price. Based on experience, passion, commitment, the series has been redesigned for even better performance that will allow the user to take a factory product out of the box that is up to any task on the airsoft field.
To this end, the Core Gen.2series has been equipped with, among others:
- Rotational Hop-Up TDC Magnus™ chamber (Top Down Center) allowing a very accurate and stable adjustment (covered by the European Patent number 015052069-0001)
- Helium™ Flat Hop Eraser, which will improve the stability of the ball's undercurve
- Aluminium sealed nozzle
- Æther™ Gearbox - reinforced frame (covered by European Patent number: 015044865-0001), equipped with:
- mainspring release function
- pre-cocking and AoE inspection windows
- reinforced front
- inspection windows for easy priming
- trigger adjustment function
- screw holes for frame alignment
- Ready for use with M140 springs
Features of the HAL™ system:
- trigger detection based on magnetic sensors and Hall effect
- active brake
- binary trigger
- adjustable trigger sensitivity (5 levels from 20 to 100%)
- adjustable pre-cocking (6 levels)
- AUTO programmable fire modes (full auto, semi, 3-rd burst, 5-rd burst)
- SEMI programmable fire modes (semi, binary, AUG, sniper)
- easy programming via trigger
- low battery alarm
- compatible with brushless motors
The body, the slide and the SF battery compartment, as well as the pistol grip, are made of nylon fibre-reinforced polymer. Other components, such as the barrel, front, suppressor and the stock are made of nylon fibre-reinforced polymer. other components, such as the barrel, the front of the replica, the flame suppressor, the enlarged reloading handle and the tactical sling assembly are made of metal (all screws, pins, the cartridge ejection window and the dummy lock are made of steel).
The replica is very well-fitted and the user will not notice any play between the upper and lower parts of the body. The use of lightweight polymer body allowed to reduce the weight, which makes it perfect for dynamic games or prolonged milslims. Furthermore, the fibreglass reinforcement also makes the body stronger than polymer and metal bodies.
The replica uses the quick spring change system, ESA™. This allows quick and efficient adjustment of the replica's power to the conditions expected on the field of play without the need for access to a workshop or a number of specialised tools - simply unscrew the butt guide to reveal access to exchange the spring without having to pull out or disassemble the gearbox.
The advantages of the ESA™ system are difficult to overstate. In view of the arrangements within the environments themselves, this system guarantees the user considerable possibilities and a great deal of freedom. The ESA™ system makes it possible, with a minimum of time, to change the mainspring and thus to adapt the replica's discharge speed to the area of play, so as to guarantee an ideal compromise between the effectiveness of fire control and the safety of oneself and other players.
The replica has been fully adapted to work with LiPo and LiFe type batteries. With a base initial discharge velocity of ~390 FPS guaranteed by the pre-installed mainspring, the replica is perfectly suited for medium range operations. An M90-type spring is also included, which allows the initial velocity to be reduced to ~310 FPS, thus making the replica perfectly suited for short-range or indoor operations.
The replica is equipped with a 22mm RIS dorsal rail and an adjustable buttstock. Thanks to the extendable buttstock finished with a non-slip textured footplate, it is possible to adjust the length of the replica to the build and preferences of the shooter. The flame suppressor is mounted on a 14-mm left-hand thread.
Package include:
- 2 x mid-cap S-MAG magazine
- Cleaning rod
- Replica
- Allen key
- Small Tamyia - Deans adapter
- BBs speedloader
- M90 additional spring
Package exclude:
- The set does not include the battery nor charger
NOTE!!!
When starting the replica for the first time, immediately after connecting the batteries, hold the trigger in SAFE mode for about 5 seconds to activate the HAL™ module
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).