Specna Arms SA-E12-RL EDGE 2.0™GATE ASTER HIGH SPEED Half-Tan Carbine Replica
- Brand: Specna Arms
- color: Half-Tan
- produkt length: 74
- weight [g]: 2460
- made from: Steel, ZnAl, Plastic
- muzzle velocity [FPS]: 360
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Replica carbine SA-E12-RL EDGE 2.0™ HIGH SPEED
EDGE™ is a line of replicas Specna Arms, which combines a range of solutions and technologies difficult to found in other replicas on the market. It is a line that puts both on very good external execution, solutions increasing versatility of the replica, extending its lifespan, as well as susceptibility to power tuning. From the box you get a replica in which you do not need to make any modifications, but if you want - they will be fabulously easy.
The Light Ops edition features a minimalist weight-saving flask, with an
impeccable and modernistic design. The Light Ops extendable flask
features rubber non-slip stickers on both sides of the cheekpiece,
and a distinctive curved rubberised flask foot that comfortably
settles comfortably on the shoulder.
Body is a Specna Arms proprietary design combining aesthetic qualities and high ergonomics. Each element has been made and fitted with attention to detail. attention to detail. The replica has been equipped with both sides selector, magazine release and steel suspension eyelet. Additionally, a Nano Coating anti-scratch coating has been used to finish the barrel.
The replica carbine SA-E12-RL is equipped with a free-floating front in the standard KeyMod type with mounted RIS / Picatinny rails allowing for
for the installation of various accessories such as grips, torches, laser pointers or optical sights.
laser pointers or optical sights. The barrel of the replica is finished with
with an outlet device mounted on a threaded 14mm CCW. On the dorsal RIS rail are placed folding targeting instruments.
The rifle has a stock-mounted precision internal barrel with a diameter of 6.03mm, which will ensure high accuracy and repeatability of shots fired. The barrel is partnered with rotating Hop-Up chamber, which allows for a very precise and stable adjustment of the ball cocking system.
The standard-mounted rubber band Helium™ Flat Hop will improve the stability of the ball's curl and make your shots even more accurate.
The replica uses the quick-change spring system, ESA2™. It allows the replica's power to be quickly and efficiently adapted to the conditions expected on the field of play without the need for tools. In the box with the replica there is also a second M90 mainspring, which is perfect for indoor gaming.
The ESA2™ system is covered by European Patent no: 007422159-0001
The heart of the replica is the ORION Gearbox based on a
on a reinforced skeleton and equipped with a spring release function
mainspring. The High Speed configuration has the following parts inside:
- reinforced, polymer piston with full steel jaw
- lightweight, polymer piston head with bearing
- aluminium sealed nozzle
- polymer cylinder head
- set of steel gears with gear ratio 13:1 with made SSG -3 teeth,
- bearing spring guide
- 8mm ball bearings
The replica also uses a powerful, efficient high-torque motor fitted with strong neodymium magnets. The motor has a winding 22TPA (Turn Per Arm). This combination allows for a firing rate of 25 k/s (using an 11.1V battery).
The factory-installed ASTER SE™ circuit offers up to 250
trigger sensitivity settings, faster trigger response and many other
useful features to gain an edge on the airsoft battlefield.
A smart fuse protects the battery, motor and controller, even
when the battery is connected in reverse.
Features of the ASTER™ system:
- innovative optical sensors
- 250 trigger sensitivity settings
- configurable via the replica's trigger, or the GATE Control Station app
- built-in RGB LED for easy system programming
- premium-level functionality
The replica series EDGE 2.0™ features a dedicated Solar™ Trigger Tongue that works perfectly with the sensors of the ASTER™ system to offer unprecedented sensitivity and precision. The Specna Arms trigger language was developed under license Gate Quantum Trigger ™.
Note! Some functions of the ASTER™ system are available in the GCS application (Gate Control GCS (Gate Control Station) application which requires a USB-Link (not included - to be purchased separately).
The replica box contains two mid-cap S-MAG magazines with a capacity of capacity of 125 rounds each. The S-MAG is an exclusive polymer magazine designed by Specna Arms. The distinctive texture composed of Specna Arms logos. The S-mag ensures trouble-free ball feed, even at high ROF.
Package include:
- 2 x mid-cap S-MAG magazine
- Deans adapter - small Tamyia
- GATE ASTER diagnostic card
- Instruction
- Replica
- M90 additional spring
- Vertical Grip
Package exclude:
- The set does not include the battery nor charger
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).