Specna Arms SA-F02 FLEX™ HAL ETU™ 0.5J Half-Tan airsoft Carbine
- Brand: Specna Arms
- color: Half-Tan
- weight [g]: 2320
- made from: Metal, Polymer
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Specna Arms SA-F02 FLEX™ HAL ETU™ 0.5Jairsoft Carbine
The trigger control system supports the replica's performance and allows programming of functions easily using the trigger and selector.
HAL™ chip features:
-trigger detection based on magnetic sensors and Hall effect
-active brake
-binary trigger
-adjustable trigger sensitivity (5 levels from 20 to 100%)
-adjustable pre-cocking (6 levels)
-aUTO programmable fire modes (full auto, semi, 3-rd burst, 5-rd burst)
-sEMI programmable fire modes (semi, binary, AUG, sniper)
-easy programming via trigger
-low battery alarm
-compatible with brushless motors
**The AUTO function fires a 3 round burst first then fires Full Auto.
The replica is made mainly of nylon fibre-reinforced polymer and metal parts. The polymer used is characterised by its high strength, rough texture and matt colour.
Nylon fibre-reinforced polymer is used for the barrel, free-float front, slide and SF battery compartment, as well as the pistol grip. Aluminium and ZnAl alloy are used for the barrel, flame damper, enlarged reloading handle and manipulators. All screws, pins, the cartridge ejection window and the dummy lock are made of steel, while the barrel is marked with the serial number.
The replica is very well-fitted, the user will not experience any play between the lower and upper parts of the body. The use of lightweight material for the body and front made it possible to reduce weight, which makes it perfect as a replica for dynamic CQB games. Furthermore, the nylon fibre reinforcement makes the structure more robust than other polymer constructions.
The replica has been fully adapted to work with LiPo and LiFe type batteries. The replica's power has been adapted to the German market <230 fps. For this reason, spring replacement is only possible after opening the gearbox.
Inside we find:
- 8-millimetre plain bearings
- Steel gears
- Polycarbonate polymer piston with a full steel bar
- Type 2 cylinder
- rotary Hop-Up Chamber
-high quality 6.03mm precision barrel
The flame suppressor is set on a 14mm left-hand thread.
Package include:
- S-Mag Hi-Cap Magazine
- Cleaning rod
- Replica
- Small Tamyia - Deans adapter
Package exclude:
- The set does not include the battery nor charger
NOTE!!!
When starting the replica for the first time, immediately after connecting the batteries, hold the trigger in SAFE mode for about 5 seconds to activate the HAL™ module
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).