Specna Arms SA-H11 ONE™ Aster ETU Custom DSG airsoft Carbine Black
- Brand: Specna Arms
- color: Black
- produkt length: 80
- weight [g]: 2750
- made from: Metal, Steel, Polymer
- muzzle velocity [FPS]: 370
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Specna Arms DSG Edition SA-H11 ONE™ Aster ETU Custom airsoft Carbine
The model presented here is a Custom replica that has undergone a thorough transformation under the watchful eye of Gunfire service technicians.
The following components were used for the DSG configuration:
- GATE ASTER™ system
- Specna Arms 6.02mm precision barrel with a length of 229mm
- Specna Arms M150 spring
- V3 + DSG hammerpet plate from SHS
- Aluminium nozzle for M4/M16 replicas from Tornado
- Hop-Up T.N.T. TR-HOP 50° for AEG replicas
- T.N.T. T-Hop spacer
- Steel Type 1 cylinder from SHS
- Lightweight piston 15 steel teeth - SHS
- High Torque long motor from Specna Arms
- M4-114 trigger - Kublai red
- Bearing-supported piston head, white SHS
- Cylinder head for M4 v.2 (Short type) - SHS
The SA-H11 airsoft rifle from manufacturer Specna Arms is a well-fitted and very well-balanced airsoft gun. It is made of a uniform zinc and aluminium alloy, and the most sensitive areas are steel, i.e. the sling mount, screws and pins. It is characterised by almost ideal manoeuvrability, high functionality, as well as versatility - you can use the replica on the open battlefield and indoors.
TheSA-H11 ONE™replica features theEnter & Convert™quick-change spring system , which allows you to adjust the replica's power without opening the Gearbox.
The SA-H11 ONE™ replica features:
- Polymer adjustable buttstock and comfortable pistol grip
- manufacturer's markingson the body
- equipped with double-sided manipulators
- functional bolt-catch
- equipped with a dorsal 22mm RIS rail and a front RIS rail assembly
- features metal sighting instruments flip-up type
- abrasion resistant paint, thanks to powder coating
-14 mm left-handthread allows to mount a sound suppressor
-anodisedRIS railassembly
- mid-cap magazine for 120 rounds
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).