XTC G1-M Carbine Replica
- Made of: Aluminum + metal + steel + plastic Weight: 2770g Length: 795-880mm Colour: Black Muzzle Velocity: ~390 / ~360 FPS Power source: Electric Manufacturer: Modify
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
XTC G1-M Carbine Replica
Modify-Tech to ceniona firma z ponad 50-letnią tradycją, specjalizująca się w produkcji najwyższej jakości części zamiennych, narzędzi, akcesoriów. Z powodzeniem działa na rynku airsoftowym oferując części wewnętrzne, zestawy tuningowe i wiele innych. Prezentowana replika karabinu elektrycznego jest kolejnym, fenomenalnym produktem Modify w segmencie replik ASG. Mogliśmy być być spokojni o efekt pracy: XTC-G1 można śmiało umieścić na najwyższej półce replik elektrycznych dostępnych aktualnie na rynku.
The elements made in CNC technology out of T6065 aluminum include: the M-LOK front grip, Picatinny rails in the 1913 standard, the piston head, the cylinder head and the cylinder itself are that are made of aviation aluminum. The following parts are made out of steel, also in CNC technology: the trigger, gears, tactical sling swivel and the flash hider. The other parts, such as the Billet Style receiver and the stock guide, are made out of high-quality aluminum alloy. The 14.5-inch outer barrel was made out of metal, with the use of CNC machines.
The double-sided, 45-degree firing mode selector allows you to operate it with with both the left and right hand. It is a very convenient solution to speed up operating of the selector.
The muzzle velocity adjustment system combined with the quick spring change system makes the replica very versatile. With just one turn of 30 degrees of the bolt on the joint between the receiver and the stock guide you can limit the muzzle velocity to about ~ 360 FPS.
The Wide-Bore Extreme Precision barrel (caliber 6.1 mm) increases the replicas range - thanks to the wide diameter, the BB’s do not bump into the barrel interior, so they fly much further than in replicas with a similar muzzle velocity.
A functional bolt-catch will significantly facilitate the adjustment of the hop-up, which is designed for precise calibration, the tightness of the entire hop-up system has been maximized.
The ergonomic pistol grip, folding sights and the stock were made out of a reinforced nylon polymer fiber. The stock also has steel elements. The 6-position stock adjustment is very convenient, it works very smoothly and without problems. Importantly - in place of traditional cables routed inside the guide, a system of built-in contacts has been utilized, so that the cables do not interfere with the batterie placement in the guide, and when adjusting the FPS or using the quick spring replacement.
The gearbox of this replica is yet another masterpiece. It houses a set of steel gears made on CNC machines: durable and virtually indestructible. They are fitted on 8mm ceramic ball bearings. The piston with seven steel teeth High speed / Torque Ultra ends with a head made of aviation aluminum. The piston is embedded in the cylinder, also made of aviation aluminum.
The included mid-cap magazine with a capacity of 190 BBs was made of glass-fiber reinforced plastic.
The set includes:
- replica
- magazine
- user manual
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).