ZK-19-01 Vityaz PDW EBB Submachine Gun Replica
- Made of: steel + aluminum + Nylon Weight: 3755g Length: 640/ 720mm Color: black Muzzle Velocity: ~405 FPS Engine: electric Manufacturer: LCT
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
ZK-19-01 Vityaz PDW EBB Submachine Gun Replica
A replica of the PP-19-01 Vityaz submachine gun with an extendable stock and a set of mounting rails ZB-21M and ZB19 from the renown LCT. The model is top-tier in terms of representation and durability, which is synonymous of this manufacturer.
Features of the replica:
- Most of the elements are made out of blackened steel, including the receiver, the front with the barrel, the butt stock and a complete dummy bolt with a gas piston.
- The pistol grip, the stock, the magazines and the magazine well are made out of good quality plastic.
- 14mm left-hand thread at the end of the barrel.
- The dust cover allows for stable mounting of the optics thanks to the 22mm RIS rail and two fixing points.
- Aluminum ZB-21M handguard and the ZB19 overlay allow for the installation of additional accessories.
- Short RIS rail on the base of the front sight for the flashlight / laser pointer.
- EBB system based on a full dummy bolt carrier with a gas piston, which significantly increases the realism of the replica while using it.
Inside the replica you will find:
-A set of steel gears
-Polycarbonate piston
-Steel, ball-bearing spring guide
-Chrome cylinder
-CNC aluminum cylinder head
-Aluminum ventilated CNC piston head
-A tight bore brass inner barrel with a diameter of 6.02 mm.
The set includes a double (combined), mid-cap type magazine made out of plastic, with a capacity of 50 BBs each.
NOTE: in spite of the apparent similarity, the replica is not compatible with MP5 magazines.
The set does not include a battery or a charger.
The set includes:
- replica
- double magazine
- user manual
Additional accessories shown in the photos are not included in the set!
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).