Fusil de airsoft LK33A2 EBB
- Nombre del fabricante / marca: LCT
- Peso del producto [g]: 4480
- Material: Metal, Plástico
- Velocidad de salida [FPS].: 400
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Fusil de
airsoft LK33A2 EBB
La marca
taiwanesa LCT se enorgullece de presentar el primer fusil de airsoft LK33A2 en el
mercado del airsoft. Es un arma de airsoft de máximo realismo, fabricada con
materiales lo más parecidos posible a su equivalente arma de fuego. Su peso
razonable (más de 4 kg), su construcción de acero y la perfecta atención a los
detalles dan la impresión de estar ante un arma de fuego, y no ante su arma de
airsoft.
LK33 se distingue
por la máxima calidad de fabricación y de los materiales utilizados, por los
que son famosas las armas de airsoft de LCT. Para la fabricación de todos los
componentes de metal se ha utilizado acero. Entre otros, el cañón, el cañón
exterior, la culata plegable, la base del guión o el mango de recarga son de
acero. Siguiendo con el ejemplo de un fusil inflamable, componentes como el
cañón inferior, el guardamanos, el butt plate, el grip de pistola y la tapa del
grip de recarga son de nailon. Tras tirar hacia atrás del grip de recarga,
accedemos al ajuste del sistema Hop-Up. El propio grip se puede bloquear en la
posición trasera, y también es plegable para no sobresalir del cuerpo compacto
del fusil.
El corazón del
arma de airsoft es un resistente gearbox v.2 equipado con rodamientos de 9 mm,
en el que se han montado una serie de componentes reforzados, tales como:
- un conjunto de
engranajes de acero
- guía de muelle
de acero montada sobre rodamientos
- cilindro de
latón
- cabeza de
pistón de aluminio CNC
- cabeza de
cilindro de aluminio CNC
- juego de
rodamientos de bolas de acero de 9 mm
La versión
Electric Blow Back mejora la experiencia de tiro utilizando una imitación de la
corredera móvil que genera un retroceso ¡similar al de un arma de fuego real!
Todo ello está
accionado por un potente motor High-Torque 25.000 rpm. La batería del arma de
airsoft está colocada dentro del guardamanos. La eficacia del disparo se verá
afectada significativamente por el cañón interior de latón de 445 mm.
Con el arma de
airsoft se incluye un cargador de munición hi-cap de acero con capacidad para
300 bolas.
El kit no
incluye batería ni cargador.
El kit
incluye:
- arma de airsoft
- cargador de
munición
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).