airsoft Arcturus LWT MK-I Carabina CQB 10" AEG SPORT SE™ Starter Pack Gris
- Nombre del fabricante / marca: Arcturus
- Color: Gris
- Peso del producto [g]: 2115
- Material: Aluminio, Acero, Polímero
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
airsoft Arcturus LWT MK-I Carabina CQB 10" AEG SPORT SE™ Starter Pack
La red dotsión Starter Pack incluye además:
- Cargador de red B3 Arcturus incluido (el cable de red requerirá un adaptador Tipo A -> Tipo C
- Batería Nunchuck 11,1 V 2000 mAh
- Muelle adicional de 350 FPS
La fusil airsoft de Arcturus modelo LWTMK-I CQB 10" AEG SPORT SE™ se ha fabricado principalmente con nylon PA66, que se ha reforzado con fibra de vidrio.
El anillo de la corredera, los tornillos de la bancada, el soporte táctico de correa, el soporte QD y la corredera ficticia se han fabricado en acero . Al mismo tiempo, el dispositivo de descarga, los manipuladores (seguro del cerrojo, selector, retén del cargador) y las palancas de recarga se fabricaron en aluminio . Para el cañón se utilizó nylon PA66 con una base M-LOK de 10 pulgadas de largo. En la base se encuentran además los raíles RIS. Los raíles RIS también son de nylon: tanto en la base como en el cañón. Hay una empuñadura de pistola ergonómica, que tiene una superficie rugosa, un cargador, una cabeza de cilindro ergonómica y ajustable, que acomoda la batería y miras plegables.
La réplica es ligera, bien ajustada y equilibrada, su interior ofrece muy buenas prestaciones en su configuración de fábrica y una buena base para su puesta a punto.
En el interior de la réplica encontraremos, entre otros:
- Cilindro de acero
- Reductor V2 con sistema de cambio rápido de muelles
- Guía de muelle de polímero
- Frontal del Gearbox reforzado
- Tobera de polímero
- Motor de 23T (ferrita)
- Engranajes 18:1
- Cámara giratoria Hop-up
- Sistema de control óptico SE
Este modelo pertenece a la serie SE o Standard Enhanced, lo que significa que la réplica se ha equipado con una unidad de control óptico programable.
Funciones del sistema óptico SE ETU
- Pre-bloqueo (2 etapas)
- Ruptura activa (2 etapas)
- Disparo progresivo
- Modos de disparo programables
- Disparo binario con rampa
- Protección de batería baja
- Fusible electrónico
El paquete incluye:
- Acumulador
- Cargador
- Varilla de limpieza
- Hi-Cap Cargador
- Parche
- Réplica
- Allen key
- Iron sights
- Tamyia - Deans Adaptador
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).