airsoft Arcturus SR16 Rifle Ambi AEG FE™ Negro
- Nombre del fabricante / marca: Arcturus
- Color: Negro
- Longitud del producto [cm]: 99
- Peso del producto [g]: 2810
- Material: Aluminio, Acero, Polímero
- Velocidad de salida [FPS].: 400
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Arcturus SR16 Rifle Ambi AEG FE™ Carabina airsoft
Lafusil airsoft modelo SR16 de Arcturus se fabricó utilizando, entre otros materiales, acero, aluminio y plástico. El acero se utilizó para fabricar, entre otros, los soportes QD de doble cara, que se encuentran en la bancada, el cuerpo y en la cabeza de cilindro, el cerrojo, el alimentador de cabeza de cilindro ficticio, el selector de fuego, el pestillo del cargador, todos los pasadores, los tornillos de la réplica y el anillo guía de la petaca (los manipuladores del cerrojo, el selector de fuego y el pestillo del cargador son de doble cara). El cuerpo de la réplica, el cañón exterior, el supresor de llamas, la bancada M-LOK de 15 pulgadas, el raíl RIS dorsal y la fianza son de aluminio. La empuñadura ergonómica de la pistola, que tiene una superficie rugosa, un cargador de media tapa (capacidad ajustable), una petaca ergonómica y ajustable, que aloja la batería y los instrumentos de puntería plegables, son de plástico .
Todos los componentes están ajustados con gran precisión. El interior de la réplica ofrece muy buenas prestaciones en la configuración de fábrica y una buena base para la puesta a punto.
En el interior de la réplica encontraremos: - Sistema de control óptico FE - Motor 21TPA - Cámara Hop-Up rotativa
- Guía de muelle de acero con rodamientos de bolas
- Tobera POM CNC
- Sistema de muelles de cambio rápido
- Cilindro de acero tipo 2
El modelo pertenece a la serie FE o Feature Enhanced, lo que significa que la réplica ha sido equipada con un sistema de control óptico programable.
Características del sistema óptico FE ETU
-Pre-bloqueo (7 grados)
-Ruptura activa (8 grados)
-Dureza del gatillo ajustable (5 grados)
-Rearme del gatillo ajustable (5 grados)
-Gatillo progresivo guiado por algoritmos
-Gatillo hair-trigger adaptable
-Modos de disparo programables
-Disparador binario con rampa
-Protección de batería baja
-Fusible electrónico
El paquete incluye:
- Varilla de limpieza
- Mid-Cap Cargador
- Parche
- Réplica
- Assembly key
- Tamyia - Deans Adaptador
Paquete excluido:
- El kit no incluye la batería y cargadores.
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).