airsoft BOLT Airsoft SWAT K (B.R.S.S) subfusil con supresor de sonido ficticio
- Nombre del fabricante / marca: BOLT Airsoft
- Color: Negro
- Longitud del producto [cm]: 68
- Peso del producto [g]: 2560
- Material: ABS, Aluminio, Acero
- Velocidad de salida [FPS].: 270
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Pistola subfusil airsoft BOLT Airsoft SWAT K (B.R.S.S) con supresor de sonido ficticio
El modelo de subfusil airsoft SWAT K (B.R.S.S) de BOLT Airsoft ha sido equipado con un supresor de sonido ficticio.
El subfusil airsoft de Bolt Airsoft está equipado con un B .R.S.S..
Gracias a las innovadoras soluciones empleadas, por fin ha sido posible acercar la experiencia que siente el usuario de una réplica de tipo AEG a la que ofrecen las réplicas de tipo GBBR, por lo que, en definitiva, BOLT Airsoft ha creado una réplica de PMu que realmente "patea" como debe. Todo gracias al sistema de simulación del blow-back y del trabajo de la cabeza de cilindro. En el interior de la réplica, hay una imitación de una corredera real que está conectada a la Gearbox. Con cada disparo, la corredera se desplaza hacia atrás y, gracias a un muelle, vuelve a su posición original.
La réplica está muy bien ajustada y al mismo tiempo es compacta, lo que permitirá utilizarla durante las partidas CQB cuando el usuario se encuentre en espacios reducidos. Cuando la cabeza de cilindro está plegada, el modelo no es mucho más grande que una pistola normal, lo que se traducirá en una movilidad utilitaria aún mejor.
La altísima calidad de construcción es el resultado de los materiales utilizados en la producción. La parte superior de la réplica, la rosca 14 CCW, el alojamiento del cargador y todos los tornillos y pasadores se han fabricado en acero. La funda, la empuñadura de la pistola y la petaca plegable son de ABS duradero, que se ha reforzado con fibra de vidrio. La petaca se ha fijado a la réplica mediante un adaptador Picatinny. La réplica está equipada con una empuñadura delantera de polímero que aloja la batería.
Características de la mercancía: - Diseño robusto y compacto basado en la famosa PM. - Construcción en acero, ABS, fibra de vidrio - Culata plegable - Empuñadura delantera con compartimento para la batería - Sistema B.R.S.S - Supresor de sonido ficticio - Adaptador para cableado
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).