airsoft Cybergun x FN HERSTAL SCAR-SC subcarbina con funda de transporte
- Nombre del fabricante / marca: CyberGun
- Color: Negro
- Longitud del producto [cm]: 66
- Peso del producto [g]: 3215
- Material: Aluminio, Acero, Polímero
- Velocidad de salida [FPS].: 380
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Subfusil airsoft Cybergun x FN HERSTAL SCAR-SC con maletín de transporte
Una subfusil airsoft de Cybergun bajo licencia de FN HERSTAL - fabricante belga de armas de fuego - lo que se traducirá en marcas apropiadas en el cuerpo de la fusil - es decirel logotipo del fabricante belga FN HERSTAL y el nombre FN HERSTAL BELGIUM.
Además, el cuerpo lleva el nombre del modelo FN SCAR-SC MULTI-CALIBER .
En el maletín de transporte incluido también figura el logotipo del fabricante de la contraparte inflamable.
El modelo se ha fabricado con acero, aluminio y plástico.
El acero se utiliza para el supresor de llamas, el asa de recarga, la mira, los pasadores y los tornillos. El aluminio se utiliza para el cuerpo de la réplica (parte superior), el cañón exterior, los raíles RIS superior e inferior (que permiten montar, por ejemplo, ópticas o empuñadura red dottical), manipuladores como el cerrojo y la palanca de bloqueo. el plástico se utiliza para el cañón (parte inferior), el bloque de gas ficticio, los raíles RIS laterales, la empuñadura de pistola, el selector de tiro y la cabeza de cilindro PDW (3 niveles de ajuste)
Al tirar hacia atrás de la palanca de recarga, el usuario accederá al ajuste Hop-up. La ventana permanecerá abierta hasta que, utilizando el cerrojo, se cierre.
En el interior de la réplica, encontraremos el conocido Gearbox V2 equipado con un sistema de muelles de cambio rápido. Esto será aún más útil, ya que se ha incluido un segundo muelle en el kit - que permitirá aumentar la potencia hasta aproximadamente 1,3 J.
El funcionamiento de todo el sistema será responsabilidad del Mosfet EFCS de ARES - que mejorará el funcionamiento del modelo, mejorando la respuesta del gatillo, a la vez que permitirá un funcionamiento más suave y efectivo en el campo de airsoft.
Características de la mercancía:
- Subcarbina eléctrica de diseño popular
- Con licencia de FN HERSTAL - Marcas en el cuerpo
- Bolt-catch de trabajo
- Culata PDW ajustable
- Rieles RIS en la bancada
- Manipuladores de doble cara (liberador de cargador, selector de fuego)
- Diseño robusto y equilibrado
- Miras abatibles
- Mosfet EFCS de ARES
- Maletín de transporte
- Sistema de muelles de cambio rápido
- Cámara Hop-up giratoria
- Muelle adicional de 1,3 J
El paquete incluye:
- Varilla de limpieza
- Instrucción
- Cargador
- Réplica
- Allen key
Paquete excluido:
- El kit no incluye la batería y cargadores.
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).