Ametralladora airsoft Arcturus PPK20M1 AEG PE™
- Nombre del fabricante / marca: Arcturus
- Color: Negro
- Longitud del producto [cm]: 67.60
- Peso del producto [g]: 2927
- Material: Aluminio, Acero, Polímero
- Velocidad de salida [FPS].: 370
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
airsoft Arcturus PPK20M1 AEG PE™ Ametralladora
Una réplica del subfusil PPK-20 fabricado por Arcturus. La PPK20M1 AEG se ha fabricado principalmente en acero y algunas piezas en aluminio y polímero duradero. Cuenta con tubo de gas, soporte del cañón, tapa, cabeza de cilindro falsa, palanca selectora, mecanismo de bloqueo de la cabeza de cilindro, guardamonte, pestillo de la cabeza de cilindro, pestillo del cargador y recámara de cabeza de cilindro falsa. El cañón, el raíl RIS dorsal, los selectores de tiro y el silenciador de llama son de aluminio . El polímero se utiliza para el cargador, la cabeza de cilindro con patas de goma, la empuñadura de pistola con fianza integrada y la bancada con tapa del tubo de gas.
Todas las piezas encajan con gran precisión, las piezas metálicas han sido acabadas con un recubrimiento mate anticorrosivo. El interior de la réplica ofrece muy buenas prestaciones en la configuración de fábrica y una buena base para el tuning.
En el interior de la réplica encontramos
-Cañón de precisión de 6.03mm
-Cámara Hop Up giratoria
-Motor de 21TPA sobre imanes de neodimio
-Engranajes de acero 13:1
-Boquilla CNC POM
-Cilindro de acero inoxidable mecanizado CNC
-Pistón con mandíbula de acero
-Sistema de muelle de cambio rápido con guía de muelle con cojinetes de acero
El modelo pertenece a la serie PE, es decir, Performance Enhanced, lo que significa que la réplica se ha equipado con un sistema óptico de control programable de PERUN.
Funciones del sistema óptico ETU PERUN:
-Pre-bloqueo (8 grados)
-Ruptura activa (5 grados)
-Dureza del gatillo ajustable (5 grados)
-Disparador progresivo guiado por algoritmos
-Gatillo hair-trigger adaptable
-Modos de disparo programables
-Serie de dos disparos
-Disparador binario
-Sistema de diagnóstico
-Cuenta atrás ROF
-Alarma Li-Po
-Fusible electrónico
El paquete incluye:
- Mid-Cap Cargador
- Parche
- Réplica
- Tamyia - Deans Adaptador
Paquete excluido:
- El kit no incluye la batería y cargadores.
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).