Ametralladora de airsoft CES-P A5 S3
- Construcción: acero + ZnAl + plástico Longitud: 500-650mm Peso: 2745g Color: negro Velocidad de salida: ~395 FPS Propulsión: eléctrica Fabricante: ICS
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Ametralladora de airsoft CES-P A5 S3
El CES-P A5 S3 es un arma de airsoftowem AEG producido por lamarca de culto ICS. Réplica está fabricado con la máxima atención al detalle a partir de acero, ZnAl y plástico polimérico TPR con una agradable textura al tacto.
Una característica que distingue a la serie réplicas CES-P de otras disponibles en el mercado es el cuerpo superior de chapa de acero SPCC prensada.
Acero - hay una parte superior del cuerpo, cargador y accesorios de la correa de transporte. El cuerpo inferior con gripem pistolaow, el pie de la mufla y la cama están hechos de polímero, mientras que muzzle, la guía de la mufla, los instrumentos opticas y el mango de recarga están hechos de aleación de aluminio.
La réplica utiliza el revolucionario CES Split ICS Gearbox con muelle de cambio rápido, donde el 90% de las piezas son compatibles con el estándar del mercado. También cuenta con el sistema electrónico SSS.II E-Trigger System instalado de fábrica, que ofrece, entre otras cosas, la posibilidad de disparar una ráfaga de 3 disparos, una función de pre-conexión y gatillo Short-Stroke. Réplica cuenta con un sistema de corte de energía automático cuando se abre el cañón y un liberador de muelle real.
Características réplicas:
- cuerpo superior de chapa de acero prensada
- piezas de plástico TPR
- cES Split ICS Gearbox
- sistema de disparo electrónico SSS.II
- posibilidad de realizar una serie de 3 disparos (ráfaga)
- gatillo Carrera corta
- homora de metal Hop-up
- acero cargador hi-cap capacidad de 230 balas
- compartimiento de la batería dentro de la cama
- selector de modo de disparo en ambos lados
- telescópico culata con ajustablelongitud j
El kit no incluye la batería y cargadores.
El kit incluye:
- réplica
- cargador hi-cap
- manual de instrucciones
- cortador
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).