Ametralladora de airsoft Culata APC9-K
- Material: plástico + ZnAl + acero Longitud: 390-590mm Peso: 2110g Color: negro Velocidad de salida: ~300 FPS Propulsión: eléctrica Fabricante: Arrow Arms
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Ametralladora de airsoft Culata APC9-K
La APC9-K es una ultra compacta subfusil ASG fabricada por Arrow Arms. El receptor superior réplicas, el cañón exterior y la palanca de recarga están hechos de metal, mientras que el receptor inferior, junto con el gripem pistola, está hecho de polímero duradero. Réplica tiene una petaca de polímero cómoda y plegable hacia el lado, y gracias a los manipuladores de dos lados es muy universal para los tiradores diestros y zurdos
Réplica está alimentado por motor tipo SLIM junto con gearboxem V2 equipado con elsistemaelectrónico EFCS con la posibilidad de programación (se requiere un programador separado). En la caja con réplica encontrará hasta 3 cargadores de diferente longitud y capacidad hechas de polímero.
El APC9 de Arrow Arms es una gran opción para réplica para jugar en espacios reducidos, para escaramuzas CQB, y también como un práctico extra réplica para el tirador.
Características réplicas:
- cuerpo de metal y plástico polimérico
- plegado, polímero culata
- juego de rieles accesorios RIS / Picatinny
- palanca de recarga plegablede doble cara
- selector de modo de disparode doble cara, extractor tienegasynka y bolt-catch
- juego de miras plegables flip-up
- muzzle tipo MP5, compatible con los supresores de sonido dedicados MP5
- cámaragiratoria hop-up
- estrecho grip pistola owy con motoriem tipo SLIM
- gearbox V2 con electrónica EFCSprogramable
El kit no incluye la batería y cargadores.
El kit incluye:
- réplica
- cargador 110 balas
- cargador 80 bolas
- cargador 65 pellets
- dispositivo de carga magasynka
- manual de instrucciones
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).