Ametralladora de airsoft RPKS74MN EBB
- Versión de soplado eléctrico Tipo: acero + plástico Longitud: 1060 mm Peso: 4685g Color: negro Velocidad de salida: ~420 FPS Propulsión: eléctrica Fabricante: LCT
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Ametralladora de airsoft RPKS74MN EBB
Ametralladora de airsoft fabricado por LCT estaba hecho casi por completo de acero. También son de acero: bocacha, la tapa de cierre, el tubo de gas, bipode, cañón externo, la corredera, la base de la cuerda del arco, el codo de gas, la base del cañón, el soporte de la cama, el cortador y los instrumentos opticas. El grip pistola owy, culata y grip fore-end estaban hechos de plástico de nylon negro.
El conjunto con elementos bien hechos y equipadome crea una estética, duradera y bastante pesada réplica manual ametralladora.
La versión réplica de la EBB utiliza una corredera completa, muy coherente con la original. El sistema de simulación de retroceso EBB en este caso se siente fuertemente a través del movimiento de toda la corredera full y no sólo una manija de recarga ficticia como es el caso de otros fabricantes. La mayor satisfacción de disparar se siente, por supuesto, después de poner el selector en el modo de disparo automático
Para que todo el sistema funcione correctamente, fue necesario modificar el marco de gearbox. Otra curiosidad es el uso de unmonolítico de acero pistóna en el , dotado de un cierre especial que se encarga de mover todo el conjunto de la corredera
Otras partes de gearboxa son totalmente compatibles con la norma Gearboxa V3
Réplica está equipado con una cámara hop-up de plástico. Utiliza un estándar para réplicas AK, muy duradero gearbox V3. En el interior también hay una guía de muelle con rodamientos reforzada, pistón con 8 dientes de metal. Además, el gearbox está equipado con una boquilla sellada, una cabeza de cilindro y un cojinete sellado pistón.
Plegable acero bipode , cargador tipo hicap con una capacidad de 600 bolas, largo de casi 600 mm cañón interior y alta durabilidad hacen que réplica LCT sea ideal como soporte réplica.
El juego no incluye una batería y cargadores.
Eljuego incluye:
- réplica
- cargador
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).