Ametralladora de airsoft TGM A3 ETU
- Material: Plástico + metal + acero Peso: 3170g Longitud: 550-690mm Velocidad de salida: ~380 FPS Accionamiento: eléctrico Fabricante: G&G
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Ametralladora de airsoft TGM A3 ETU
Fabricada en plástico y metal de alta calidad, es una ametralladora de airsoft TGM A5. Los elementos como el cuerpo, los instrumentos de puntería, el cargador de munición y el cañón externo son de metal. El grip de la pistola con el cuerpo inferior, el grip delantero y la culata ajustable están hechos de plástico de nailon. El cargador de munición y las piezas pequeñas, como la imitación de la corredera y el cierre de la bocacha, son de acero. El selector de tiro es apto para diestros y zurdos.
Para acceder a la cámara Hop-up, basta con arrastrar la palanca de recarga y bloquearla en la posición posterior.
La réplica se distingue de otros modelos de G&G por el uso de piezas internas, además de la calidad de la mano de obra externa. En la réplica se utilizan dos sistemas electrónicos: el sistema MOSFET situado en la guía de la culata y el ETU (Electronic Trigger Unit), que aumentan la vida útil de la réplica y mejoran parámetros como la reacción del gatillo y la cadencia de tiro. El mosfet permite la programación de una secuencia de 3 a 5 disparos, informará sobre la batería baja y los daños del gearbox.
En el grip delantero se han montado tres raíles de montaje RIS de 22 mm, de 120 mm de longitud cada uno. También se incluye un raíl RIS superior montado en el cuerpo. El paquete de baterías encaja en el grip delantero. Para conectar la batería, hay que retirar el PIN situado en el grip delantero.
El kit no incluye batería ni cargador.
El kit incluye:
- réplica
- cargador de munición
- raíl de montaje RIS
- montura de suspensión QD
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).