Ametralladora de airsoft ZK-19-01 Witiaź PDW EBB
- Construcción: acero +aluminio + nylon Peso: 3755g Longitud: 640/720mm Color: negro Velocidad de escape: ~405 FPS Accionamiento: eléctrico Fabricante: LCT
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Ametralladora de airsoft ZK-19-01 Witiaź PDW EBB
Ametralladora de airsoft PP-19-01 Witiaź con cañón deslizante y un juego de rieles monturaowych ZB-21M y ZB19 de la reconocida empresa LCT. Laelaboración del modelo está a un nivel muy alto en términos de reproducción y durabilidad, lo que es característico de este fabricante.
Características réplicas:
-La mayoría de las piezas están hechas deacero ennegrecido , incluyendo el cañón, el frente incluyendo el cañón, el soporte de la petaca y la corredera falsa completa con pistón gas owy.
-Grip pistolaowy, la petaca, cargadores y la toma de magasynk son de plástico de buena calidad.
-Rosca izquierda de 14 mm en el extremo del cañón.
-Unacubierta de culata para la óptica estable montura gracias a un carril RIS de 22 mm y dos puntos de fijación.
-Cama de aluminio ZB-21M y tapa ZB19 que permite montura accesorios adicionales.
-Corto raíl RIS en la base del mosquete para una linterna/láser.
-Sistema EBB basado en una corredera de maniquí completa con pistóniem gasow aumentando significativamente el realismo durante el uso réplicas.
En el interior de réplicas encontrará:
-Juego de engranajes aceroch
-Policarbonato pistón
-Guía de muelle de cojinete de acero
-Cromado cilindro
-Aluminio cabeza de cilindro CNC
-Cabezal ventilado de aluminio pistóna CNC
-Latón cañón interior tipo de agujero apretado con un diámetro de 6,02 mm.
cargador El kit incluye un doble (enlazado) de plástico del tipo mid-cap, con una capacidad de 50 bolas cada uno
NOTA: a pesar de su aparente similitud réplica no es compatible con magasynks de la norma MP5.
El kit no incluye una batería ni cargadores
El kit incluye:
- réplica
- cargador doble
- manual de instrucciones
Los accesorios adicionales que aparecen en las fotos no están incluidos
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).