Carabina Arcturus AR15 PDW AEG FE™ 1.14 J airsoft
- Nombre del fabricante / marca: Arcturus
- Color: Negro
- Peso del producto [g]: 2560
- Material: Aluminio, Acero, Polímero
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Carabina AR15 PDW AEG FE™ 1.14 J airsoft de Arcturus
La red dotsión FE de la fusil AR15 PDW AEG airsoft de Arcturus ha sido fabricada para usuarios que esperen durabilidad y fiabilidad de una arma de airsoft que rinda bien durante partidas de tipo CQB.
La réplica cuenta con acero: manipuladores (liberador del cargador, selector de fuego, cerrojo), guía de petaca, montura QD, pasadores y tornillos,
El aluminio se utiliza para la bancada M-LOK de 8 pulgadas de largo, el cuerpo de la réplica incluyendo el raíl RIS dorsal, la extensión de la batería de 9,5 cm, el asa de recarga, el cañón externo. Hecho de plástico resistente, la réplica cuenta con una empuñadura de pistola ergonómica que tiene una superficie rugosa, una cabeza de cilindro deslizante, un cargador con capacidad ajustable, una lengüeta de disparo junto con una fianza, instrumentos de puntería mecánica.
en el interior de la réplica se encuentra:
- Cañón de precisión de 6,02mm
- Recámara Rotary Hop Up
- Motor 21TPA sobre imanes de neodimio
- Guía de muelle montada sobre rodamientos
- Boquilla CNC POM
- Sistema de muelles de cambio rápido con guía de muelles con cojinetes de acero
- FE Optical ETU Mosfet
Este modelo pertenece a la serie FE o Feature Enhanced, lo que significa que la réplica está equipada con un sistema de control óptico programable.
Funciones del FE Optical ETU:
-Preamartillar (7 grados)
-Ruptura activa (8 grados)
-Dureza del gatillo ajustable (5 grados)
-Rearme del gatillo ajustable (5 grados)
-Gatillo progresivo guiado por algoritmos
-Gatillo hair-trigger adaptable
-Modos de disparo programables
-Disparador binario con rampa
-Protección de batería baja
-Fusible electrónico
El paquete incluye:
- Varilla de limpieza
- Mid-Cap Cargador
- Parche
- Réplica
- Assembly key
- Iron sights
- Tamyia - Deans Adaptador
Paquete excluido:
- El kit no incluye la batería y cargadores.
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).