Carabina Arcturus Karambit® MOD1 PDW 5,5" AEG LITE FE™ airsoft
- Nombre del fabricante / marca: Arcturus
- Color: Negro
- Peso del producto [g]: 2205
- Material: Aluminio, Acero, Polímero
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Arcturus Karambit® MOD1 PDW 5,5" AEG LITE FE™ Carabina airsoft
La fusil airsoft de Arcturus se ha fabricado con acero, plástico y aluminio, entre otros materiales.
Son de acero : la guía de la petaca PDW, la corredera ficticia y los tornillos de la bancada.
El aluminio se utiliza para la bancada del sistema M-LOK de 5,5" de largo, el raíl RIS en la bancada, el dispositivo de escape, los manipuladores (ambos lados - selector, cerrojo-retén, retén del cargador), el inyector ficticio, la extensión de la batería (9,5 cm de largo, la palanca de recarga, el retén de la petaca.
El cuerpo de la réplica está hecho de plástico (nylon PA66 reforzado con fibra de vidrio), empuñadura de pistola ergonómica, que tiene una superficie rugosa, cargador de media tapa (capacidad ajustable), y pie de petaca.
La réplica es ligera, bien ajustada y equilibrada. Sus dimensiones compactas permitirán un movimiento eficaz en los pasillos, donde la movilidad y la velocidad son esenciales para obtener ventaja durante las partidas de airsoft.
El interior de la réplica ofrece muy buenas prestaciones en su configuración de fábrica y una buena base para el tuning.
En el interior de la réplica encontrarás, entre otros:
- Motor de 23 TPA
- Engranajes 18:1
- Cámara Hop-up rotativa
- Tobera POM CNC
- Sistema de muelles de cambio rápido
- Sistema de control óptico FE
Este modelo pertenece a la serie FE o Feature Enhanced, lo que significa que la réplica ha sido equipada con un sistema de control óptico programable.
Características del sistema óptico FE ETU
- Preamartillar (7 grados)
- Ruptura activa (8 grados)
- Dureza del gatillo ajustable (5 grados)
- Rearme del gatillo ajustable (5 grados)
- Gatillo progresivo guiado por algoritmos
- Gatillo hair-trigger adaptable
- Modos de disparo programables
- Disparador binario con rampa
- Protección de batería baja
- Fusible electrónico
El paquete incluye:
- Varilla de limpieza
- Mid-Cap Cargador
- Parche
- Réplica
- Allen key
- Iron sights
- Tamyia - Deans Adaptador
Paquete excluido:
- El kit no incluye la batería y cargadores.
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).