- Nombre del fabricante / marca: E&L
- Color: Negro
- Longitud del producto [cm]: 74
- Peso del producto [g]: 3150
- Material: Madera, Acero, Plástico
- Velocidad de salida [FPS].: 390
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Réplica del subfusil ELS-74UN Essential
La legendaria marca E&L, cuyas magníficas réplicass de fusiles de asalto rusos (¡y mucho más!) han conquistado los corazones de los jugadores de airsoft de todo el mundo, vuelve con la serie E&L Essential. Las réplicass de esta línea, caracterizadas por un precio ligeramente inferior al de la generación anterior, conservan todas las características gracias a las cuales los productos de la marca E&L se han ganado una sólida posición en el mercado. Entre ellas se encuentran la construcción 100% de acero, el aspecto y diseño realistas, la robusta gearbox y el excelente ajuste.
La mejor garantía de realismo es el hecho de que las armas de airsoft E&L se ensamblan en una fábrica dedicada a la fabricación de armas de fuego, y por lo tanto, algunos componentes externos son idénticos a los de la contraparte de armas de fuego y salen de la minasma línea de producción. El fabricante ha cuidado hasta el más mínimo detalle para que sus réplicass sean lo más parecidas posibles al original.
Características de la carabina:
- construcción en 100% acero, sin el uso de componentes de ZnAl
- bancada y tapa del tubo de de de gases de madera maciza barnizada
- piezas de acero con recubriminaento de óxido
- empuñadura de la pistola de polímero
- compartimento de la batería bajo la tapa de la cámara de cierre
- carril de montaje lateralpara óptica
- petaca del armazón abatible hacia el lateral
- metal cámara de hop-up
- posibilidad de desmontaje parcial de la réplicas, como una contraparte inflamable - sin el uso de herraminaentas
- inserto distanciador de cargador, facilitando el cambio de cargador
- cargador de polímero en caja capuchón medio con una capacidad de 150 cartuchos
La gearbox V3 con la que cuenta la réplicas E&L Essential incorpora un sistema de cambio rápido por muelle.
Además en su interior encontrarás componentes como:
- cilindro de acero inoxidable
- policarbonato pistón con 1 diente de acero
- placa de taqué resistente al desde de gaste POM
- juego de 9mm rodaminaentos de acero
- engranajes duraderos de acero en polvo
- acero lengüeta de gatillo
El paquete incluye:
- Certificado QC
- Instrucción
- Mid-Cap Cargador
- Réplica
Paquete excluido:
- El kit no incluye la batería y cargadores.
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).