- Nombre del fabricante / marca: E&L
- Color: Negro
- Longitud del producto [cm]: 74
- Peso del producto [g]: 3150
- Material: Madera, Acero, Polímero
- Velocidad de salida [FPS].: 380
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
E&L ELS-74UN Platinum GATE ASTER SE V3
Marca E&L Airsoft, conocida por producir réalistas e indestructibles réplicas de madera y acero, presentando en esta ocasión una red dotsión renovada de la réplica AKS-74UN.
La mejor garantía de realismo es el hecho de que las armas de airsoft E&L se ensamblan en una fábrica dedicada a la fabricación de armas de fuego, y en consecuencia, algunos componentes externos son idénticos a los de las armas de fuego y salen de la misma línea de producción. El fabricante ha cuidado hasta el más mínimo detalle para que sus réplicas sean lo más parecidas posible al original.
La fusil pertenece a la Serie Platinodonde el nivel de atención al detalle se ha llevado a la perfección. En el interior de las réplicas de esta serie, encontrará una serie de piezas de alta calidad para mejorar tanto el rendimiento como la durabilidad, características de las réplicas tuning de alta gama.
Características de la fusil:
- construcción en 100% acero, sin uso de componentes de ZnAl
- cama y tapa del tubo de gas de madera maciza barnizada
- piezas de acero recubiertas de óxido
- empuñadura de pistola de material polimérico
- espacio para la batería bajo la tapa de la cámara de cierre
- lateral raíl de montaje para la óptica
- petaca del armazón plegada hacia un lado
- metal cámara de salto
sin utilizar< herramientas
- insertar distanciador de cargador,< facilitando el cambio de cargador
La gearbox V3 con la que cuenta la réplica incorpora sistema de cambio rápido de muelle, un conjunto de piezas reforzadas y un sistema GATE ASTER SE V3. El ASTER SE V3 de la empresa polaca GATE es una ETU avanzada que ofrece sensibilidad de disparo ajustable, Active-Break y series ajustables.
Además en su interior encontrarás componentes como:
- Motor Hi-Torque sobre imanes de neodimio 21T
- Juego de engranajes de acero 13:1
- Rodamientos de acero de 9mm en configuración 2 x Slipper, 4 x Ball bearing
- Conjunto de cilindro de acero de una pieza mecanizado CNC
- Pistón reforzado
El paquete incluye:
- Certificado QC
- E&L Commemorative Challenge Coin
- Tarjeta de diagnóstico GATE ASTER
- Mid-Cap Cargador
- Parche
- Réplica
Paquete excluido:
- El kit no incluye la batería y cargadores.
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).